Accesories

The universal aluminum door sill from DIP-Tools is a durable quality product due to the low-odour, pollutant-free and rust-free material. It not only saves energy, but also money, because it offers ideal protection against heat and energy loss. As a door seal for room and/or front doors, it not only stops drafts, but also offers reliable protection against annoying dust, insects, rain, moisture, odors, noise and much more. The rust-free universal aluminum door sill is also a true all-rounder and, with the highly elastic silicone hose seal, fits on the one hand for every door. On the other hand, the product can also be used as a weather-resistant threshold or weatherboard to allow rain to drain off external doors and to protect sensitive materials such as wood. Last but not least, the self-adhesive universal aluminum door sill scores points with its incredibly easy installation. Simply adjust the door sill to the desired size and glue or screw it tight. With the DIP-Tools assembly adhesive it also works on difficult surfaces.

Technical characteristics of the universal alu threshold

• Type: BM 30
• Area of application: interior and exterior doors
• Material: aluminum
• Gasket: silicone
• Dimension: 55 x 8mm
• silver

Instructions for the optimal installation of the door sill

1. Shorten the door sill to the desired length
2. If you want to glue the door sill, the surface must be freed from dirt, dust, oil and grease. If you want to screw the product, you can skip this step
3. Glue or screw the door sill

Tip: If you want to glue the door sill to difficult surfaces, we recommend using DIP-Tools universal assembly adhesive .

We would be happy to make you an offer for other lengths. Please contact us.

The universal aluminum door sill from DIP-Tools is a durable quality product due to the low-odour, pollutant-free and rust-free material. It not only saves energy, but also money, because it offers ideal protection against heat and energy loss. As a door seal for room and/or front doors, it not only stops drafts, but also offers reliable protection against annoying dust, insects, rain, moisture, odors, noise and much more. The rust-free universal aluminum door sill is also a true all-rounder and, with the highly elastic silicone hose seal, fits on the one hand for every door. On the other hand, the product can also be used as a weather-resistant threshold or weatherboard to allow rain to drain off external doors and to protect sensitive materials such as wood. Last but not least, the self-adhesive universal aluminum door sill scores points with its incredibly easy installation. Simply adjust the door sill to the desired size and glue or screw it tight. With the DIP-Tools assembly adhesive it also works on difficult surfaces.

Technical characteristics of the universal alu threshold

• Type: ARB
• Area of application: interior and exterior doors
• Material: aluminum
• Gasket: silicone
• Dimension: 45*45mm
• silver

Instructions for the optimal installation of the door sill

1. Shorten the door sill to the desired length
2. If you want to glue the door sill, the surface must be freed from dirt, dust, oil and grease. If you want to screw the product, you can skip this step
3. Glue or screw the door sill

Tip: If you want to glue the door sill to difficult surfaces, we recommend using DIP-Tools universal assembly adhesive .

We would be happy to make you an offer for other lengths. Please contact us.

The universal aluminum door sill from DIP-Tools is a durable quality product due to the low-odour, pollutant-free and rust-free material. It not only saves energy, but also money, because it offers ideal protection against heat and energy loss. As a door seal for room and/or front doors, it not only stops drafts, but also offers reliable protection against annoying dust, insects, rain, moisture, odors, noise and much more. The rust-free universal aluminum door sill is also a true all-rounder and, with the highly elastic silicone hose seal, fits on the one hand for every door. On the other hand, the product can also be used as a weather-resistant threshold or weatherboard to allow rain to drain off external doors and to protect sensitive materials such as wood. Last but not least, the self-adhesive universal aluminum door sill scores points with its incredibly easy installation. Simply adjust the door sill to the desired size and glue or screw it tight. With the DIP-Tools assembly adhesive it also works on difficult surfaces.

Technical characteristics of the universal alu threshold

• Type: BM 30
• Area of application: interior and exterior doors
• Material: aluminum
• Gasket: silicone
• Dimension: 55 x 8mm
• silver

Instructions for the optimal installation of the door sill

1. Shorten the door sill to the desired length
2. If you want to glue the door sill, the surface must be freed from dirt, dust, oil and grease. If you want to screw the product, you can skip this step
3. Glue or screw the door sill

Tip: If you want to glue the door sill to difficult surfaces, we recommend using DIP-Tools universal assembly adhesive .

We would be happy to make you an offer for other lengths. Please contact us.

The DIP-Tools 2-component static mixers are used for the mechanical mixing of the 2-component epoxy resin adhesive, so that an ideal mixing of both components is guaranteed.

The static mixers are offered for the 25/50ml cartridge and for the 150ml cartridge.

Technical specifications

• Material: Polypropylene
  
• Length: 112.5mm/142mm
• Mixing ratio: 1:1
• Mixing cycles: 17/20
• Outlet diameter : 1.8mm/8.7mm

application

First, the 2-component epoxy resin adhesive is screwed on and the static mixer is attached. When using a static mixing nozzle, the two components are mixed within the mixing nozzle so that the mixing is ideal. The first 2 g must be discarded as they are not yet mixed 1:1. However, the mixing nozzle can only be used until the adhesive in the mixing nozzle has dried. A new nozzle is then required.

The universal aluminum door sill from DIP-Tools is a durable quality product due to the low-odour, pollutant-free and rust-free material. It not only saves energy, but also money, because it offers ideal protection against heat and energy loss. As a door seal for room and/or front doors, it not only stops drafts, but also offers reliable protection against annoying dust, insects, rain, moisture, odors, noise and much more. The rust-free universal aluminum door sill is also a true all-rounder and, with the highly elastic silicone hose seal, fits on the one hand for every door. On the other hand, the product can also be used as a weather-resistant threshold or weatherboard to allow rain to drain off external doors and to protect sensitive materials such as wood. Last but not least, the self-adhesive universal aluminum door sill scores points with its incredibly easy installation. Simply adjust the door sill to the desired size and glue or screw it tight. With the DIP-Tools assembly adhesive it also works on difficult surfaces.

Technical characteristics of the universal alu threshold

• Type: BM 30
• Area of application: interior and exterior doors
• Material: aluminum
• Gasket: silicone
• Dimension: 55 x 8mm
• silver

Instructions for the optimal installation of the door sill

1. Shorten the door sill to the desired length
2. If you want to glue the door sill, the surface must be freed from dirt, dust, oil and grease. If you want to screw the product, you can skip this step
3. Glue or screw the door sill

Tip: If you want to glue the door sill to difficult surfaces, we recommend using DIP-Tools universal assembly adhesive .

We would be happy to make you an offer for other lengths. Please contact us.

The DIP-Tools 2-component static mixers are used for the mechanical mixing of the 2-component epoxy resin adhesive, so that an ideal mixing of both components is guaranteed. The static mixers are offered for the 25/50ml cartridge and for the 150ml cartridge.

Technical specifications

• Material: Polypropylene
  
• Length (25.50ml/150ml) : 112.5mm/142mm
  
• Mixing ratio: 1:1
  
• Mixing cycles: 17/20
  
• Outlet diameter : 1.8mm/8.7mm

First, the 2-component epoxy resin adhesive is screwed on and the static mixer is attached. When using a static mixing nozzle, the two components are mixed within the mixing nozzle so that the mixing is ideal. The first 2 g must be discarded as they are not yet mixed 1:1. However, the mixing nozzle can only be used until the adhesive in the mixing nozzle has dried. A new nozzle is then required.

The Alumat flat threshold is used to bridge different floor coverings at the same height. It consists of aluminum and is coated with a colored powder in a special baking process.

The high-quality self-adhesive strip enables secure attachment without screws or dowels.

Technical characteristics of the flat sleeper

• Material: aluminum
• Dimensions (lxwxh): 1000mm x 40mm x 3mm
• Color silver anodized

Instructions for optimal installation of the flat sleeper

1. Cut the aluminum rail to the frame clearance.

2. Apply assembly adhesive to the inside of the horizontal and vertical legs. Immediate adhesion and walkability is achieved if hot glue is additionally applied in dots.