Bestseller

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area

Entdecken Sie die Kunst der Kintsugi-Reparatur mit unserem exklusiven DIP-TOOLS Kintsugi Porzellankleber Reparatur Set. Unser Set ist Ihre Eintrittskarte zu einer Welt der kunstvollen Reparatur, welche kaputtes Porzellan, Keramik und mehr in faszinierende Kunstwerke verwandelt.

Traditionelle Reparatur
Kintsugi ist eine alte japanische Reparaturmethode für Keramik und Porzellan, die tief in der ästhetischen Philosophie des "Wabi Sabi" des Zen-Buddhismus verwurzelt ist.

Nachhaltigkeit
Die Kintsugi-Philosophie spiegelt den zeitgenössischen Geist der Nachhaltigkeit wider, indem sie Kaputtes und Beschädigtes nicht einfach wegwerfen lässt, sondern es aufwertet. Durch diese Praxis wird sofort das Bewusstsein für die Vergänglichkeit jeder Sache geschärft, selbst wenn Keramik und Porzellan zu den haltbarsten Materialien der Menschheitsgeschichte gehören.

Einfache Anwendung
Mit unserem Kintsugi-Kit Reparatur-Kleber wird die Reparatur Ihrer Stücke zum Kinderspiel. Einfach den Kleber auf die beschädigten Stellen auftragen und die Porzellanteile zusammenfügen. Die Reparatur mit unserem Porzellan-Set ist im Handumdrehen erledigt, und die Ergebnisse sprechen für sich.

Erschaffen Sie Neues
Die japanische Wabi-Sabi-Ästhetik zielt darauf ab, die Unvollkommenheit eines jeden Gegenstandes zu offenbaren, wobei kleine Imperfektionen bewusst sichtbar gemacht werden. Kintsugi-Porzellan illustriert dieses Konzept auf eindrucksvolle Weise, indem die feinen silbernen und goldenen Linien den Blick auf die Bruchstellen lenken und so ihre Schönheit betonen.

Vielseitig Nutzbar
Es lassen sich die verschiedensten Dinge mit unserem Emaille- Reparaturkleber restaurieren, wie z.B Vasen, Töpfe, Schalen, Schüsseln, Kannen, Henkel und vieles mehr. Vor allem bei Gegenständen welche eine hohe emotionale Bindung mit sich tragen, ist diese Art der Reparatur sehr empfehlenswert.

Knetfix 2-component high-performance adhesive dough from DIP-Tools is a robust all-rounder with an incredibly versatile area of application. The product can be used on a wide variety of surfaces such as ceramics, glass, wood, metal or concrete for gluing, filling, modeling or sealing. In addition, thanks to its UV and weather-resistant properties, the product can be processed indoors and outdoors and even under water. Even heavier loads such as chemicals, oil or petrol as well as extreme cold (-30°C) and heat (+120°C) cannot harm the modeling clay. But our adhesive putty is not only convincing in terms of versatility and longevity. The fast processing and curing time in particular speaks for the 2-component high-performance adhesive putty. The putty can be processed in a full 10 minutes and after just 30 minutes the mass can be further processed by drilling, sawing, sanding, sanding or painting.

Technical properties of the high-performance adhesive putty

• Base: epoxy and polyamine resins
• Processing time: approx. 10 minutes
• Curing time: 12 hours
• Bond Strength: 22Mpa
• Viscosity: 12,000 MPa xs
• Can be painted over and varnished
• Doesn't shrink
• Resistant to water, oil, petrol, UV, heat, cold and many chemicals

Instructions for the optimal use of the high-performance adhesive dough

1. Remove dirt, dust and grease/oil from the surface
2. Mix Knetfix until a uniform mass is formed. Please wear gloves.
3. Carefully press the compound onto the area to be repaired, the total processing time is 10 minutes
4. If necessary, use a screw clamp or similar to press on for 15 minutes
5. After half an hour, the mass can be further processed (e.g. drilling, grinding, painting, etc.)
6. Final strength is reached after 12 hours

Storage instructions for the high-performance adhesive dough

• Keep away from acids
• Keep away from oxidizing agents
• Store in well-ventilated areas

Our all-round adhesive and sealing solution is suitable for almost all materials and weather conditions. The one-component, completely waterproof and extra strong universal assembly adhesive glues and seals almost all materials indoors and outdoors. Due to its enormous initial adhesion and final strength, the MS polymer assembly adhesive is ideal for fixing and sealing large material panels, fastening curtain rods and many other areas of application. The universal assembly adhesive is also a perfect alternative to drilling in almost every situation. But the universal assembly adhesive also shines in terms of longevity thanks to its UV and weather resistance. Yellowed and porous areas are a thing of the past. If the glued parts are to be removed at some point, our product can be painted over or removed mechanically.

Note: The universal assembly adhesive is suitable for materials such as wood, glass, metal, ceramics, concrete, natural stone, iron, aluminium, steel and plastics such as PVC. Please use our primer for gluing and sealing difficult-to-glue materials such as PE, PP and PTFE.

Technical properties of the universal assembly adhesive

• Color white
• Skin formation time: 8-10 minutes
• Curing time: 24 hours
• Final strength: 4 hours
• Shore hardness A: 65
• Tensile strength: 157 N/cm²
• Shear force: 196 N/cm²
• Flash point: 93°C
• Elongation at break 286%
• Curing speed: 4.5 mm/24h
• Density: 1.44 g/cm³
• Manufactured on the basis of silane-modified polymers
• moisture curing
• Solvent and shrinkage free

Storage instructions for the universal assembly adhesive

• Apply using a suitable cartridge press
• Minimum application temperature: 5 °C
• Store unopened in a cool, dry place
• Storage temperature between 10°C and 25°C
• Note the best-before date

Instructions for optimal use of the universal assembly adhesive

1. The wings must be clean and free of grease and dust. Processing temperature +5°C to +40°C. Adhesion tests are recommended.
2. Cut off the cartridge tip at the top of the cartridge and screw the nozzle.
3. Cut the nozzle to get the desired angle, bead size and shape.
4. Insert the cartridge into the cartridge gun and pull the trigger.
5. Apply continuous beads or dots, applying enough pressure to properly apply the mounting adhesive.

Where adhesives fail, a universal primer usually helps. The durable universal primer from DIP-Tools is a primer for the pre-treatment of difficult-to-bond plastics such as PE, PP and silicone. It doesn't matter whether you want to prime indoors or outdoors. The product defies very high and low temperatures and withstands a wide variety of weather conditions. In addition, the high-quality, resealable bottle ensures that the primer does not dry out and can be used for a long time if stored optimally.

Tip: In order to achieve optimal results and maximum adhesive performance, we recommend that you only use the product in combination with other DIP-Tools adhesives.

Technical characteristics of the universal primer

• Temperature resistant
• weather resistant
• Suitable for materials that are difficult to bond

Instructions for optimal use of the universal primer

1. Remove moisture, grease, oil, dust and other contaminants from the surface
2. Coat both sides with universal primer using a brush or cloth
3. Leave to dry for 1-2 minutes
4. Finish with the glue of your choice from the DIP-Tools range

Storage instructions for the universal primer:

• Close the bottle properly immediately after use.
• Store cool and dry
• Protect from frost, intense heat, sunlight, humidity and water.

The DIP-Tools UV adhesive is a solvent-free, one-component adhesive that is characterized by a short curing time and easy application. Curing takes place by irradiation with UV or visible light. It is suitable for plastics, wood, metal, ceramics and glass, among other things.

Technical characteristics of the UV glue

• Base: acrylic resin
  
• Viscosity: medium viscosity
• Color: colorless
• Density: 1.04 g/cm³
• Shore hardness A: 75
  
• Temperature resistance: -40-120°C
  
• Flash point: 65°C
• Hand strength: > 10s

Instructions for using the glue

1. At room temperature, simply open the tube and apply the adhesive evenly. The adhesive clings to the surface. It is recommended to have a cloth ready for wiping.
   
2. Apply glue and join and press the parts to be connected. Then sufficiently irradiate with the UV lamp. The hand strength is reached after at least 10s, for larger surfaces the irradiation is to be increased by an appropriate time.
3. Wipe the nozzle after use so that the lid does not stick and then close the tube tightly. After curing, you can sand or file the splice. Because the adhesive can be applied in several layers, it is well suited for processing in two steps: first fix the objects to be glued with a minimal amount and then apply enough material to create a sufficiently stable connection. It is well suited for punctiform connections, not for flat gluing. The contents are sufficient for around 400 applications with punctiform connections.

The waterproof adhesive, sealing and repair tape from DIP-Tools is the revolution in the field of adhesive tapes. Thanks to innovative technology, the adhesive tape is the perfect choice for all bonding and sealing work involving water and moisture. It can even be used in salt water. Aquatape is particularly suitable for repairing pools and rain gutters, but thanks to its enormous adhesive strength it can also be used as a universal adhesive tape in almost all areas. The waterproof repair and sealing tape from DIP-Tools masters surfaces such as wood, plastic, rubber, concrete, metal or glass without any problems. The self-adhesive repair tape even clings effortlessly to uneven areas. The tape seals immediately and is a simple, fast and above all long-lasting alternative to expensive repair work. In addition, the sun and other environmental influences cannot harm your repair due to its UV and weather-resistant properties.

Note: The revolutionary DIP-Tools repair tape can be used in the following areas: plumbing, roofs, rainwater gutters, pipes, cars, bicycles, motorcycles, boats, backpacks, water sports (floating suits, surfboards...), swimming pools, truck tarpaulins, umbrellas, etc

Technical characteristics of waterproof repair tape

• Color: transparent, colorless
• Length: 150cm, width 10cm
• Tensile strength 2.4 N/mm²
• Temperature range -15°C - 100°C
• chemical resistant
• Suitable for EPDM
• self-adhesive
• UV-resistant

Instructions for the optimal use of the waterproof repair tape

1. Surface must be free of dirt, dust and oil
2. The leakage should be covered by 5 cm on all sides (corresponds to a foil dimension of 11 cm for a hole with a diameter of 1 cm)
3. Cut the tape and stick it to the surface to be repaired or sealed, avoiding touching the adhesive surface if possible

Storage instructions for the waterproof repair tape

• Store in a dark and dry place at 15°C - 24°C room temperature
• Shelf life min. 2 years (if stored correctly)

The universal aluminum door sill from DIP-Tools is a durable quality product due to the low-odour, pollutant-free and rust-free material. It not only saves energy, but also money, because it offers ideal protection against heat and energy loss. As a door seal for room and/or front doors, it not only stops drafts, but also offers reliable protection against annoying dust, insects, rain, moisture, odors, noise and much more. The rust-free universal aluminum door sill is also a true all-rounder and, with the highly elastic silicone hose seal, fits on the one hand for every door. On the other hand, the product can also be used as a weather-resistant threshold or weatherboard to allow rain to drain off external doors and to protect sensitive materials such as wood. Last but not least, the self-adhesive universal aluminum door sill scores points with its incredibly easy installation. Simply adjust the door sill to the desired size and glue or screw it tight. With the DIP-Tools assembly adhesive it also works on difficult surfaces.

Technical characteristics of the universal alu threshold

• Type: BM 30
• Area of application: interior and exterior doors
• Material: aluminum
• Gasket: silicone
• Dimension: 55 x 8mm
• silver

Instructions for the optimal installation of the door sill

1. Shorten the door sill to the desired length
2. If you want to glue the door sill, the surface must be freed from dirt, dust, oil and grease. If you want to screw the product, you can skip this step
3. Glue or screw the door sill

Tip: If you want to glue the door sill to difficult surfaces, we recommend using DIP-Tools universal assembly adhesive .

We would be happy to make you an offer for other lengths. Please contact us.

The odorless and colorless superglue from DIP-Tools offers maximum strength with an extremely wide range of applications and is therefore the first choice in the field of fast-hardening all-purpose glue. It can be used on a wide range of materials such as craft glue, rubber glue, ceramic glue and metal glue. You can even use the DIP-Tools superglue as wood glue. The odorless superglue takes effect just 10 seconds after application and hand strength is achieved for many materials. After a short hardening, the odorless superglue offers a very high final strength. The product is also suitable for sensitive gluing work, because its colorlessness means it can be processed without a trace and efflorescence and white haze are a thing of the past. When developing the DIP tool superglue, we paid particular attention to safety for the user. On the one hand, the product can be used anywhere thanks to its odorless, RoHs-compliant formulation. On the other hand, our ergonomic, soft bottle made in Germany ensures optimal application - without any sticky fingers.

Note: The odorless superglue is suitable for materials such as rubber, metal, wood, aluminium, ABS, polycarbonate and PVC. Please use our primer for plastics that are difficult to bond, such as PE and PP.

Technical properties of the odorless instant glue

• Base: methoxyethyl cyanoacrylate
• Color: transparent, colorless
• Viscosity: 25°C (Brookfield) approx. 120 - 170 mPa.s
• Density: 1.11 g/cm³
• Gap filling capacity: 0.15 mm
• Temperature resistance from: -40 to +80°C
• Handling strength: 5 - 90 seconds
• Final strength: 24 hours
• moisture curing
• 100% odorless
• Label-free, RoHs compliant

Fixing times of the odorless superglue

• ABS: 10-20 seconds
• Mild Steel: 5-10 seconds
• Polycarbonate: 20-35 seconds
• Aluminum: 5-10 seconds
• Pine wood: 5-10 seconds
• Beech wood: 15-25 seconds
• PVC: 10-20 seconds

Instructions for the optimal use of the odorless superglue

1. The parts to be bonded must be clean and free of oil and grease.
2. Apply DIP-Tools superglue thinly to one side
3. Join the parts to be connected and press together
4. The parts should be positioned as precisely as possible because of the sometimes short fixing time (adhesive is hand-tight after 5 - 90 seconds).
5. The optimum relative humidity should be around 65%

Storage instructions for the odorless superglue

• Store cool (5°C to 8°C), dark and dry
• Storage time: at least 12 months (if stored correctly)

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).

Unser DIP-Tools Alleskleber-Gel ermöglicht ein angenehmes Arbeiten auch an
schwierigen Stellen, wie z.B bei Überkopfarbeiten oder bei Arbeiten an vertikalen Flächen.
Die hochviskose und ablauffeste Formulierung klebt Metalle, Kunststoff, Gummi aber auchporöse, saugfähige Materialien wie Kork, Holz und vieles mehr.

Verzögerte Aushärtung
Das Sekundenkleber-Gel härtet langsamer aus als herkömmliche Sekundenkleber,
dadurch können Hohlräume sauber gefüllt werden und Sie haben nach dem kleben noch
genug Zeit um die zu verklebenden Oberflächen korrekt zu positionieren.
Starker Halt
Dank seiner hochwirksamen Formel gewährleistet der Sekundenkleber eine dauerhafte
und belastbare Verbindung zwischen verschiedenen Materialien. Er sorgt für eine robuste
Bindung, die auch starken Beanspruchungen standhält.
Gel-Formel
Die gelartige Konsistenz des Klebers ermöglicht ein einfaches und kontrolliertes Auftragen. Durch die präzise Dosierung wird vermieden, dass der Kleber ungewollt verschmiert oder tropft. Für ein perfektes Ergebnis.
Transparentes Finish
Unser Alleskleber-Gel trocknet transparent aus, sodass die Klebeverbindung nahezu
unsichtbar wird. Dies ist besonders vorteilhaft bei Reparaturen oder Bastelarbeiten, bei
denen ästhetische Aspekte eine Rolle spielen.
Vielseitige Anwendbarkeit
Egal ob im Haushalt, im Hobbybereich oder im Bereich Auto & Motorrad, dieser
Sekundenkleber ist ein Alleskönner. Auch bei industriellen Anwendungen überzeugt unser
Alleskleber auf ganzer Linie.

Weitere Anwendungsbereiche:
• Reparaturen: Ideal zum Fixieren von gebrochenen Gegenständen wie Porzellan,
Glas, Keramik, Holz, Kunststoff, Metall und anderen Materialien.
• Handwerk und Bastelarbeiten: Beim Basteln von Modellen, beim Herstellen von
Schmuck oder beim Zusammenfügen von Kunstprojekten ist der Sekundenkleber
ein unverzichtbares Werkzeug.
• Elektronik und Haushaltsgeräte: Sekundenkleber kann bei der Reparatur von
elektronischen Geräten, wie z.B. bei der Befestigung von Gehäuseteilen oder
Kleinteilen, eingesetzt werden.
• Hobby und Modellbau: Ob beim Zusammenbau von Modellflugzeugen, Autos oder
Schiffen, der Alleskleber ermöglicht eine präzise und starke Verbindung von
Kunststoff-, Metall- und Holzteilen.

The odorless and colorless superglue from DIP-Tools offers maximum strength with an extremely wide range of applications and is therefore the first choice in the field of fast-hardening all-purpose glue. It can be used on a wide range of materials such as craft glue, rubber glue, ceramic glue and metal glue. You can even use the DIP-Tools superglue as wood glue. The odorless superglue takes effect just 10 seconds after application and hand strength is achieved for many materials. After a short hardening, the odorless superglue offers a very high final strength. The product is also suitable for sensitive gluing work, because its colorlessness means it can be processed without a trace and efflorescence and white haze are a thing of the past. When developing the DIP tool superglue, we paid particular attention to safety for the user. On the one hand, the product can be used anywhere thanks to its odorless, RoHs-compliant formulation. On the other hand, our ergonomic, soft bottle made in Germany ensures optimal application - without any sticky fingers.

Note: The odorless superglue is suitable for materials such as rubber, metal, wood, aluminium, ABS, polycarbonate and PVC. Please use our primer for plastics that are difficult to bond, such as PE and PP.

Technical properties of the odorless instant glue

• Base: methoxyethyl cyanoacrylate
• Color: transparent, colorless
• Viscosity: 25°C (Brookfield) approx. 120 - 170 mPa.s
• Density: 1.11 g/cm³
• Gap filling capacity: 0.15 mm
• Temperature resistance from: -40 to +80°C
• Handling strength: 5 - 90 seconds
• Final strength: 24 hours
• moisture curing
• 100% odorless
• Label-free, RoHs compliant

Fixing times of the odorless superglue

• ABS: 10-20 seconds
• Mild Steel: 5-10 seconds
• Polycarbonate: 20-35 seconds
• Aluminum: 5-10 seconds
• Pine wood: 5-10 seconds
• Beech wood: 15-25 seconds
• PVC: 10-20 seconds

Instructions for the optimal use of the odorless superglue

1. The parts to be bonded must be clean and free of oil and grease.
2. Apply DIP-Tools superglue thinly to one side
3. Join the parts to be connected and press together
4. The parts should be positioned as precisely as possible because of the sometimes short fixing time (adhesive is hand-tight after 5 - 90 seconds).
5. The optimum relative humidity should be around 65%

Storage instructions for the odorless superglue

• Store cool (5°C to 8°C), dark and dry
• Storage time: at least 12 months (if stored correctly)

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).

Technical characteristics of the replacement magnet

• Dimensions (lxwxh): 1000mm x 15mm x 6mm

Our all-round adhesive and sealing solution is suitable for almost all materials and weather conditions. The one-component, completely waterproof and extra strong universal assembly adhesive glues and seals almost all materials indoors and outdoors. Due to its enormous initial adhesion and final strength, the MS polymer assembly adhesive is ideal for fixing and sealing large material panels, fastening curtain rods and many other areas of application. The universal assembly adhesive is also a perfect alternative to drilling in almost every situation. But the universal assembly adhesive also shines in terms of longevity thanks to its UV and weather resistance. Yellowed and porous areas are a thing of the past. If the glued parts are to be removed at some point, our product can be painted over or removed mechanically.

Note: The universal assembly adhesive is suitable for materials such as wood, glass, metal, ceramics, concrete, natural stone, iron, aluminium, steel and plastics such as PVC. Please use our primer for gluing and sealing difficult-to-glue materials such as PE, PP and PTFE.

Technical properties of the universal assembly adhesive

• Color white
• Skin formation time: 8-10 minutes
• Curing time: 24 hours
• Final strength: 4 hours
• Shore hardness A: 65
• Tensile strength: 157 N/cm²
• Shear force: 196 N/cm²
• Flash point: 93°C
• Elongation at break 286%
• Curing speed: 4.5 mm/24h
• Density: 1.44 g/cm³
• Manufactured on the basis of silane-modified polymers
• moisture curing
• Solvent and shrinkage free

Storage instructions for the universal assembly adhesive

• Apply using a suitable cartridge press
• Minimum application temperature: 5 °C
• Store unopened in a cool, dry place
• Storage temperature between 10°C and 25°C
• Note the best-before date

Instructions for optimal use of the universal assembly adhesive

1. The wings must be clean and free of grease and dust. Processing temperature +5°C to +40°C. Adhesion tests are recommended.
2. Cut off the cartridge tip at the top of the cartridge and screw the nozzle.
3. Cut the nozzle to get the desired angle, bead size and shape.
4. Insert the cartridge into the cartridge gun and pull the trigger.
5. Apply continuous beads or dots, applying enough pressure to properly apply the mounting adhesive.

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area

Our two-component adhesive is suitable for almost all materials and weather conditions. The two-component, completely waterproof and extra strong epoxy resin adhesive bonds and seals almost all materials indoors and outdoors. After just 5 minutes, our epoxy resin adhesive has an extremely strong hand strength, which, after appropriate curing, leads to an incredibly high final strength of the 2k adhesive. Our epoxy resin is transparent. The objects can be glued in such a way that no color residues of the glue are visible. The addition of colorants also sets no limits to creativity. The glue is very easy to dose, by gently squeezing the double-chamber syringe you get a 1:1 mixture. In this way, the epoxy resin slides evenly and transparently onto the material.

Technical characteristics of the universal - 2K - epoxy resin

• Basis: epoxy resin hardener (amine mixture)
  
• Viscosity: high viscosity
• Colour: yellowish
• Density: 1.1 g/ml
• Gap filling capacity: 3 mm
• Temperature resistance: -40 to 120°C
• Pot life: 5 min
• Handling strength: 10 - 12 min
• Final strength: 24 hours
• Shore hardness D: 60
• Tensile shear strength: 10 N/mm²
• Modulus of elasticity: 620 N/mm²

Storage Instructions

• The ideal storage temperature is 5 - 20°C in dark and dry conditions
  
• The storage place should be ventilated

Instructions for the optimal use of the 2-component adhesive

• The surface should be slightly roughened
• At room temperature (15-30°C) simply open the tube and apply the adhesive evenly
• The parts to be bonded must be clean and free of oil and grease
• Apply adhesive to one side and join and press the parts to be connected
• Wipe the tube after use so that the lid does not stick and then close it tightly