6 products
6 products
Sort by:
DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).
Instructions for optimal use of the universal seal
The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.
No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.
DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).
After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).
DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).
Instructions for optimal use of the universal seal
The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.
No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.
DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).
After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).
- VERY LOW ODOR - You don't want to air it out for a long time and have strong smells after using sanitary silicone? Our bathroom silicone has very little odor thanks to its neutral cross-linking system.
- EASY APPLICATION - The kitchen silicone is particularly easy to work with thanks to its high-quality composition. This makes the silicone suitable for sealing and for silicone joints.
- OPTIMAL ADHESION - The high-quality, permanently elastic silicone sealant withstands the highest demands. The sanitary putty is resistant to aging, weathering and a variety of chemicals.
- FUNGICIDE EQUIPPED - This means that the silicone is able to protect surfaces from fungal attack, which makes the bathroom silicone ideal for sanitary and wet areas such as kitchens, bathrooms and outdoor areas.
- VERSATILE - The silicone works optimally in many areas. Whether for sealing joints, sanitary facilities, glass bonding and showcase construction or for sealing profile glass.
The product protects against the harmful effects of petrol, oil products, corrosion, water, salt, and is weather and UV resistant. Forms a strong, resilient coating that resists moderate impact. Sound absorbing and soundproofing. Manufactured on the basis of synthetic resins, does not contain asphalt or bitumen. This remedy can be covered with all kinds of varnishes.
The product is characterized by very good adhesion to different substrates:
• Polyester laminates
• Polyester fillers
• Epoxy primers
• 2K acrylic primers
• Steel, stainless steel and galvanized steel base
• Aluminum base
• reactive substrate
• Plastics
areas of application
• As a lubricant and for lubricating all moving parts on machines, especially for material pairings such as plastic/plastic, plastic/metal or metal/metal such as garden tools, rubber on car doors and freezers, sunroofs, rails of all kinds, hinges, lock cylinders, garage doors . To protect electrical contacts from moisture and corrosion in plug connections in the electrical sector.
• For sealing and impregnating textiles, tarpaulins, tents and imitation leather.
• As a mold release agent in the plastics processing industry and as surface protection and care.
application
The optimum ambient temperature for use is between 15°C and 25°C. The surface must be clean, dry and free of grease. Before use, shake the container thoroughly for about 2 minutes. Make a test spray before use. The distance between the spray can and the surface to be painted should be 25 to 30 cm.
Apply the varnish in 2-3 thin coats. The time interval between individual shifts must not be longer than 5 or 10 minutes. Before applying another coat, shake the spray can well again. Clean the spray nozzle after use! – Hold the spray can upside down and spray until empty. For direct application to steel, it is recommended to apply a coat of varnish or enamel. Drying time at 20° C:
- dust dry: after approx. 30 minutes
- dry to the touch: after approx. 60 minutes
- fully dried: after approx. 2 hours
DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).
Instructions for optimal use of the universal seal
The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.
No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.
DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).
After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).
DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).
Instructions for optimal use of the universal seal
The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.
No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.
DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).
After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).
