Glass

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area

Der DIP-Tools Powerkleber ist die ultimative Lösung für alle Ihre Klebeprojekte. Mit seiner schnelltrocknenden Formel und der beeindruckenden Langzeit-Haftung bietet dieser Hochleistungskleber eine zuverlässige und dauerhafte Verbindung für eine Vielzahl von Materialien. 

Schnelltrocknend und Effizient

Unser DIP-Tools Powerkleber trocknet im Handumdrehen, wodurch Arbeitszeiten minimiert und Effizienz maximiert wird. Dies macht ihn ideal für schnelle Reparaturen und Bastelarbeiten. 

Extra Starke Haftung

Dieser Kleber bietet eine extra starke Haftung, die auch unter anspruchsvollen Bedingungen standhält. Egal, ob Sie Leder, Pappe, Holz, Kork, Schaum, Kunststoff, Gummi oder Metall verbinden möchten, der DIP-Tools Alleskleber bewältigt jede Herausforderung. 

Vielseitig einsetzbar

Durch seine breite Anwendungspalette eignet sich der Hochleistungskleber perfekt für Reparaturen im Haushalt, Handwerk, DIY-Projekte und vieles mehr. Er ist der Alleskönner für alle Klebebedürfnisse. 

Lange Haltbarkeit

Der DIP-Tools Kleber sorgt nicht nur für schnelle Reparaturen, sondern auch für eine lang anhaltende Verbindung. Genießen Sie die Sicherheit, dass Ihre Projekte dauerhaft und zuverlässig zusammengehalten werden. 

Wasserbeständigkeit

Der extra starke Kleber trotzt Feuchtigkeit und Wasser, was ihn auch ideal für Anwendungen in feuchten Umgebungen macht. Egal, ob Sie Outdoor-Möbel reparieren, Aquarien gestalten oder wasserfeste Bastelprojekte durchführen, dieser Kleber hält den Herausforderungen des Wassers stand. 

Für saugende Untergründe

Dieser spezielle Kleber eignet sich auch besonders gut für saugende Untergründe. Egal ob Sie eine gebrochene Plastikkomponente reparieren oder andere weiche Teile miteinander verbinden möchten, der DIP-Tools Superkleber ist die richtige Wahl. 

Verabschieden Sie sich von unsicheren Verbindungen und erleben Sie die Stärke des DIP-Tools Powerklebers. Mit seiner herausragenden Leistung und Vielseitigkeit ist er der perfekte Begleiter für alle, die Wert auf Qualität und Zuverlässigkeit legen.

The odorless and colorless superglue from DIP-Tools offers maximum strength with an extremely wide range of applications and is therefore the first choice in the field of fast-hardening all-purpose glue. It can be used on a wide range of materials such as craft glue, rubber glue, ceramic glue and metal glue. You can even use the DIP-Tools superglue as wood glue. The odorless superglue takes effect just 10 seconds after application and hand strength is achieved for many materials. After a short hardening, the odorless superglue offers a very high final strength. The product is also suitable for sensitive gluing work, because its colorlessness means it can be processed without a trace and efflorescence and white haze are a thing of the past. When developing the DIP tool superglue, we paid particular attention to safety for the user. On the one hand, the product can be used anywhere thanks to its odorless, RoHs-compliant formulation. On the other hand, our ergonomic, soft bottle made in Germany ensures optimal application - without any sticky fingers.

Note: The odorless superglue is suitable for materials such as rubber, metal, wood, aluminium, ABS, polycarbonate and PVC. Please use our primer for plastics that are difficult to bond, such as PE and PP.

Technical properties of the odorless instant glue

• Base: methoxyethyl cyanoacrylate
• Color: transparent, colorless
• Viscosity: 25°C (Brookfield) approx. 120 - 170 mPa.s
• Density: 1.11 g/cm³
• Gap filling capacity: 0.15 mm
• Temperature resistance from: -40 to +80°C
• Handling strength: 5 - 90 seconds
• Final strength: 24 hours
• moisture curing
• 100% odorless
• Label-free, RoHs compliant

Fixing times of the odorless superglue

• ABS: 10-20 seconds
• Mild Steel: 5-10 seconds
• Polycarbonate: 20-35 seconds
• Aluminum: 5-10 seconds
• Pine wood: 5-10 seconds
• Beech wood: 15-25 seconds
• PVC: 10-20 seconds

Instructions for the optimal use of the odorless superglue

1. The parts to be bonded must be clean and free of oil and grease.
2. Apply DIP-Tools superglue thinly to one side
3. Join the parts to be connected and press together
4. The parts should be positioned as precisely as possible because of the sometimes short fixing time (adhesive is hand-tight after 5 - 90 seconds).
5. The optimum relative humidity should be around 65%

Storage instructions for the odorless superglue

• Store cool (5°C to 8°C), dark and dry
• Storage time: at least 12 months (if stored correctly)

The product protects against the harmful effects of petrol, oil products, corrosion, water, salt, and is weather and UV resistant. Forms a strong, resilient coating that resists moderate impact. Sound absorbing and soundproofing. Manufactured on the basis of synthetic resins, does not contain asphalt or bitumen. This remedy can be covered with all kinds of varnishes.
The product is characterized by very good adhesion to different substrates:
• Polyester laminates
• Polyester fillers
• Epoxy primers
• 2K acrylic primers
• Steel, stainless steel and galvanized steel base
• Aluminum base
• reactive substrate
• Plastics

areas of application

• As a lubricant and for lubricating all moving parts on machines, especially for material pairings such as plastic/plastic, plastic/metal or metal/metal such as garden tools, rubber on car doors and freezers, sunroofs, rails of all kinds, hinges, lock cylinders, garage doors . To protect electrical contacts from moisture and corrosion in plug connections in the electrical sector.
• For sealing and impregnating textiles, tarpaulins, tents and imitation leather.
• As a mold release agent in the plastics processing industry and as surface protection and care.

application

The optimum ambient temperature for use is between 15°C and 25°C. The surface must be clean, dry and free of grease. Before use, shake the container thoroughly for about 2 minutes. Make a test spray before use. The distance between the spray can and the surface to be painted should be 25 to 30 cm.
Apply the varnish in 2-3 thin coats. The time interval between individual shifts must not be longer than 5 or 10 minutes. Before applying another coat, shake the spray can well again. Clean the spray nozzle after use! – Hold the spray can upside down and spray until empty. For direct application to steel, it is recommended to apply a coat of varnish or enamel. Drying time at 20° C:
- dust dry: after approx. 30 minutes
- dry to the touch: after approx. 60 minutes
- fully dried: after approx. 2 hours

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area

The DIP-Tools cockpit spray is a fully synthetic surface care product with a highly lubricating microfilm. The high-temperature-resistant, silicone-free care spray has an antistatic effect. It is used to support the assembly of plastic parts and stiff seat belts. It is also used to care for and protect plastic and wooden fittings. It eliminates squeaking, cracking and creaking noises in the vehicle interior and prevents door seals from freezing.
It is also UV protective on plastic and rubber. The gliding particles create smooth surfaces and also make seat belts run smoothly again. It has a satin finish with no greasy, sticky or shiny residue.

area of application

• Maintenance of plastic parts in the cockpit
• Seat belt maintenance
• For noises, especially in the vehicle interior (squeaking, cracking and creaking noises)
• Stiff window guides

application

DIP-Tools Industrial Cockpit Spray is safe to use on most surfaces. Nevertheless, we recommend that you carry out your own tests before use.
Spray directly onto the surface to be cleaned from a distance of approx. 30 cm and wipe off with a clean, dry cloth.

Characteristics

• Reduces friction thanks to grease-free, satin-matt anti-slip protection
• Effectively cleans and delays renewed absorption of dirt and dust
• Prevents the graying and discoloration of plastics through UV protection
• Regenerates stressed plastics
• Compatible with all common plastic materials
• Leaves no stains on textiles (pay attention to the spray distance!)