Products

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).

The DIP-Tools UV adhesive is a solvent-free, one-component adhesive that is characterized by a short curing time and easy application. Curing takes place by irradiation with UV or visible light. It is suitable for plastics, wood, metal, ceramics and glass, among other things.

Technical characteristics of the UV glue

• Base: acrylic resin
  
• Viscosity: medium viscosity
• Color: colorless
• Density: 1.04 g/cm³
• Shore hardness A: 75
  
• Temperature resistance: -40-120°C
  
• Flash point: 65°C
• Hand strength: > 10s

Instructions for using the glue

1. At room temperature, simply open the tube and apply the adhesive evenly. The adhesive clings to the surface. It is recommended to have a cloth ready for wiping.
   
2. Apply glue and join and press the parts to be connected. Then sufficiently irradiate with the UV lamp. The hand strength is reached after at least 10s, for larger surfaces the irradiation is to be increased by an appropriate time.
3. Wipe the nozzle after use so that the lid does not stick and then close the tube tightly. After curing, you can sand or file the splice. Because the adhesive can be applied in several layers, it is well suited for processing in two steps: first fix the objects to be glued with a minimal amount and then apply enough material to create a sufficiently stable connection. It is well suited for punctiform connections, not for flat gluing. The contents are sufficient for around 400 applications with punctiform connections.

Knetfix 2-component high-performance adhesive dough from DIP-Tools is a robust all-rounder with an incredibly versatile area of application. The product can be used on a wide variety of surfaces such as ceramics, glass, wood, metal or concrete for gluing, filling, modeling or sealing. In addition, thanks to its UV and weather-resistant properties, the product can be processed indoors and outdoors and even under water. Even heavier loads such as chemicals, oil or petrol as well as extreme cold (-30°C) and heat (+120°C) cannot harm the modeling clay. But our adhesive putty is not only convincing in terms of versatility and longevity. The fast processing and curing time in particular speaks for the 2-component high-performance adhesive putty. The putty can be processed in a full 10 minutes and after just 30 minutes the mass can be further processed by drilling, sawing, sanding, sanding or painting.

Technical properties of the high-performance adhesive putty

• Base: epoxy and polyamine resins
• Processing time: approx. 10 minutes
• Curing time: 12 hours
• Bond Strength: 22Mpa
• Viscosity: 12,000 MPa xs
• Can be painted over and varnished
• Doesn't shrink
• Resistant to water, oil, petrol, UV, heat, cold and many chemicals

Instructions for the optimal use of the high-performance adhesive dough

1. Remove dirt, dust and grease/oil from the surface
2. Mix Knetfix until a uniform mass is formed. Please wear gloves.
3. Carefully press the compound onto the area to be repaired, the total processing time is 10 minutes
4. If necessary, use a screw clamp or similar to press on for 15 minutes
5. After half an hour, the mass can be further processed (e.g. drilling, grinding, painting, etc.)
6. Final strength is reached after 12 hours

Storage instructions for the high-performance adhesive dough

• Keep away from acids
• Keep away from oxidizing agents
• Store in well-ventilated areas

The waterproof adhesive, sealing and repair tape from DIP-Tools is the revolution in the field of adhesive tapes. Thanks to innovative technology, the adhesive tape is the perfect choice for all bonding and sealing work involving water and moisture. It can even be used in salt water. Aquatape is particularly suitable for repairing pools and gutters, but can also be used as a universal adhesive tape in almost all areas thanks to its enormous adhesive strength. The waterproof repair and sealing tape from DIP-Tools masters surfaces such as wood, plastic, rubber, concrete, metal or glass without any problems. The self-adhesive repair tape also clings effortlessly to uneven areas. The tape seals immediately and is a simple, fast and above all long-lasting alternative to expensive repair work. In addition, the sun and other environmental influences cannot harm your repair due to UV and weather-resistant properties.

Note: The revolutionary DIP-Tools repair tape can be used in the following areas: plumbing, roofs, rainwater gutters, pipes, cars, bicycles, motorcycles, boats, backpacks, water sports (floating suits, surfboards...), swimming pools, truck tarpaulins, umbrellas, etc

Technical characteristics of waterproof repair tape

• Color: Black
• Length: 150cm, width 10cm
• Tensile strength 2.4 N/mm²
• Temperature range -15°C - 100°C
• chemical resistant
• Suitable for EPDM
• self-adhesive
• UV-resistant

Instructions for the optimal use of the waterproof repair tape

1. Surface must be free of dirt/dust and oil
2. The leakage should be covered by 5 cm on all sides (corresponds to a foil dimension of 11 cm for a hole with a diameter of 1 cm)
3. Cut the tape and stick it to the surface to be repaired or sealed, avoiding touching the adhesive surface if possible

Storage instructions for the waterproof repair tape

4. Store in a dark and dry place at 15°C - 24°C room temperature
5. Shelf life min. 2 years (if stored correctly)

The waterproof adhesive, sealing and repair tape from DIP-Tools is the revolution in the field of adhesive tapes. Thanks to innovative technology, the adhesive tape is the perfect choice for all bonding and sealing work involving water and moisture. It can even be used in salt water. Aquatape is particularly suitable for repairing pools and rain gutters, but thanks to its enormous adhesive strength it can also be used as a universal adhesive tape in almost all areas. The waterproof repair and sealing tape from DIP-Tools masters surfaces such as wood, plastic, rubber, concrete, metal or glass without any problems. The self-adhesive repair tape even clings effortlessly to uneven areas. The tape seals immediately and is a simple, fast and above all long-lasting alternative to expensive repair work. In addition, the sun and other environmental influences cannot harm your repair due to its UV and weather-resistant properties.

Note: The revolutionary DIP-Tools repair tape can be used in the following areas: plumbing, roofs, rainwater gutters, pipes, cars, bicycles, motorcycles, boats, backpacks, water sports (floating suits, surfboards...), swimming pools, truck tarpaulins, umbrellas, etc

Technical characteristics of waterproof repair tape

• Color: transparent, colorless
• Length: 150cm, width 10cm
• Tensile strength 2.4 N/mm²
• Temperature range -15°C - 100°C
• chemical resistant
• Suitable for EPDM
• self-adhesive
• UV-resistant

Instructions for the optimal use of the waterproof repair tape

1. Surface must be free of dirt, dust and oil
2. The leakage should be covered by 5 cm on all sides (corresponds to a foil dimension of 11 cm for a hole with a diameter of 1 cm)
3. Cut the tape and stick it to the surface to be repaired or sealed, avoiding touching the adhesive surface if possible

Storage instructions for the waterproof repair tape

• Store in a dark and dry place at 15°C - 24°C room temperature
• Shelf life min. 2 years (if stored correctly)