Sort by:
42 products
42 products
Where adhesives fail, a universal primer usually helps. The durable universal primer from DIP-Tools is a primer for the pre-treatment of difficult-to-bond plastics such as PE, PP and silicone. It doesn't matter whether you want to prime indoors or outdoors. The product defies very high and low temperatures and withstands a wide variety of weather conditions. In addition, the high-quality, resealable bottle ensures that the primer does not dry out and can be used for a long time if stored optimally.
Tip: In order to achieve optimal results and maximum adhesive performance, we recommend that you only use the product in combination with other DIP-Tools adhesives.
Technical characteristics of the universal primer
- Temperature resistant
- weather resistant
- Suitable for materials that are difficult to bond
Instructions for optimal use of the universal primer
- Remove moisture, grease, oil, dust and other contaminants from the surface
- Coat both sides with universal primer using a brush or cloth
- Leave to dry for 1-2 minutes
- Finish with the glue of your choice from the DIP-Tools range
Storage instructions for the universal primer:
- Close the bottle properly immediately after use.
- Store cool and dry
- Protect from frost, intense heat, sunlight, humidity and water.
- VERY LOW ODOR - You don't want to air it out for a long time and have strong smells after using sanitary silicone? Our bathroom silicone has very little odor thanks to its neutral cross-linking system.
- EASY APPLICATION - The kitchen silicone is particularly easy to work with thanks to its high-quality composition. This makes the silicone suitable for sealing and for silicone joints.
- OPTIMAL ADHESION - The high-quality, permanently elastic silicone sealant withstands the highest demands. The sanitary putty is resistant to aging, weathering and a variety of chemicals.
- FUNGICIDE EQUIPPED - This means that the silicone is able to protect surfaces from fungal attack, which makes the bathroom silicone ideal for sanitary and wet areas such as kitchens, bathrooms and outdoor areas.
- VERSATILE - The silicone works optimally in many areas. Whether for sealing joints, sanitary facilities, glass bonding and showcase construction or for sealing profile glass.
DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).
Instructions for optimal use of the universal seal
The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.
No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.
DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).
After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).
Unser Kinderkleber ist die ideale Lösung für kreative Köpfe von morgen. Der Kleber wurde entwickelt, um Kinder bei ihren Bastelprojekten zu unterstützen, ohne schädlichen Inhaltsstoffe.
Kinderfreundliche Formel
Wir haben bei unserem Kinder-Bastelkleber auf eine besondere Formulierung ohne chemische Inhaltsstoffe geachtet, der Kleber ist zu 99% Natürlich und besteht aus einer Basis mit Kartoffelstärke und Wasser.
Leicht auswaschbar
Sollte der Kinderkleber mal daneben gehen, lässt er sich wunderbar leicht wieder mit etwas warmen Wasser auswaschen. Das ist vor allem bei Kleber auf der Haut und auf Kleidungsstücken ein besonders großer Vorteil.
Stark und zuverlässig
Trotz seiner besonderen Eigenschaften bietet unser Bastelkleister eine zuverlässige Haftung auf Papier, Karton, Kork, Styropor und vielen weiteren Materialien, welche von Kindern gerne zum Basteln verwendet werden.
Ungiftig
Der spezielle Kleber für Kinder besitzt eine absolut ungiftige Rezeptur und enthält besondere Bitterstoffe welche die Genießbarkeit des Klebers unterbinden. Somit stehen Sie und Ihr Kind auf der sicheren Seite und Sie müssen sich keine Sorgen machen.
Anwendungsbereiche:
Bastelprojekte: Der Kinderkleber eignet sich hervorragend zum Zusammenkleben von Papier, Karton, Kork und anderen Bastelmaterialien. Kinder können somit Collagen, Grußkarten, Geschenkverpackungen, Masken, Puppen und vieles mehr herstellen.
Schulprojekte: Auch für die Schule ist unser Flüssigkleber ideal, geeignet für die Herstellung von Postern, Präsentationen, Schaubildern und Modellen. Ein sicherer Kinderkleber ist eine wichtige und Sinnvolle Investition in die Sicherheit Ihrer Kinder.
Papierhandwerk: Unser spezieller Öko-Kinderkleber ist ideal für das Erstellen von Papierhandwerk wie Origami, Scherenschnitte und das Dekorieren von Notizbüchern, Tagebüchern sowie Fotoalben.
Für den Unterricht: Besonders auch für Lehrer ist der Kinder-Bastelkleber besonders Interessant, um ihre Schüler in kreativen Unterrichtseinheiten mit einem unbedenklich Kleber auszustatten.
Entdecken Sie die Kunst der Kintsugi-Reparatur mit unserem exklusiven DIP-TOOLS Kintsugi Porzellankleber Reparatur Set. Unser Set ist Ihre Eintrittskarte zu einer Welt der kunstvollen Reparatur, welche kaputtes Porzellan, Keramik und mehr in faszinierende Kunstwerke verwandelt.
Traditionelle Reparatur
Kintsugi ist eine alte japanische Reparaturmethode für Keramik und Porzellan, die tief in der ästhetischen Philosophie des "Wabi Sabi" des Zen-Buddhismus verwurzelt ist.
Nachhaltigkeit
Die Kintsugi-Philosophie spiegelt den zeitgenössischen Geist der Nachhaltigkeit wider, indem sie Kaputtes und Beschädigtes nicht einfach wegwerfen lässt, sondern es aufwertet. Durch diese Praxis wird sofort das Bewusstsein für die Vergänglichkeit jeder Sache geschärft, selbst wenn Keramik und Porzellan zu den haltbarsten Materialien der Menschheitsgeschichte gehören.
Einfache Anwendung
Mit unserem Kintsugi-Kit Reparatur-Kleber wird die Reparatur Ihrer Stücke zum Kinderspiel. Einfach den Kleber auf die beschädigten Stellen auftragen und die Porzellanteile zusammenfügen. Die Reparatur mit unserem Porzellan-Set ist im Handumdrehen erledigt, und die Ergebnisse sprechen für sich.
Erschaffen Sie Neues
Die japanische Wabi-Sabi-Ästhetik zielt darauf ab, die Unvollkommenheit eines jeden Gegenstandes zu offenbaren, wobei kleine Imperfektionen bewusst sichtbar gemacht werden. Kintsugi-Porzellan illustriert dieses Konzept auf eindrucksvolle Weise, indem die feinen silbernen und goldenen Linien den Blick auf die Bruchstellen lenken und so ihre Schönheit betonen.
Vielseitig Nutzbar
Es lassen sich die verschiedensten Dinge mit unserem Emaille- Reparaturkleber restaurieren, wie z.B Vasen, Töpfe, Schalen, Schüsseln, Kannen, Henkel und vieles mehr. Vor allem bei Gegenständen welche eine hohe emotionale Bindung mit sich tragen, ist diese Art der Reparatur sehr empfehlenswert.
DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).
Instructions for optimal use of the universal seal
The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.
No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.
DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).
After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).
DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).
Instructions for optimal use of the universal seal
The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.
No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.
DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).
After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).
Where adhesives fail, a universal primer usually helps. The durable universal primer from DIP-Tools is a primer for the pre-treatment of difficult-to-bond plastics such as PE, PP and silicone. It doesn't matter whether you want to prime indoors or outdoors. The product defies very high and low temperatures and withstands a wide variety of weather conditions. In addition, the high-quality, resealable bottle ensures that the primer does not dry out and can be used for a long time if stored optimally.
Tip: In order to achieve optimal results and maximum adhesive performance, we recommend that you only use the product in combination with other DIP-Tools adhesives.
Technical characteristics of the universal primer
- Temperature resistant
- weather resistant
- Suitable for materials that are difficult to bond
Instructions for optimal use of the universal primer
- Remove moisture, grease, oil, dust and other contaminants from the surface
- Coat both sides with universal primer using a brush or cloth
- Leave to dry for 1-2 minutes
- Finish with the glue of your choice from the DIP-Tools range
Storage instructions for the universal primer:
- Close the bottle properly immediately after use.
- Store cool and dry
- Protect from frost, intense heat, sunlight, humidity and water.
Powerkleber I schnelltrocknend und lange haltbar - neu - transparent - 50g
8,88€
Unit price 17,76€ per 100gPowerkleber I schnelltrocknend und lange haltbar - neu - transparent - 50g
8,88€
Unit price 17,76€ per 100gDer DIP-Tools Powerkleber ist die ultimative Lösung für alle Ihre Klebeprojekte. Mit seiner schnelltrocknenden Formel und der beeindruckenden Langzeit-Haftung bietet dieser Hochleistungskleber eine zuverlässige und dauerhafte Verbindung für eine Vielzahl von Materialien.
Schnelltrocknend und Effizient
Unser DIP-Tools Powerkleber trocknet im Handumdrehen, wodurch Arbeitszeiten minimiert und Effizienz maximiert wird. Dies macht ihn ideal für schnelle Reparaturen und Bastelarbeiten.
Extra Starke Haftung
Dieser Kleber bietet eine extra starke Haftung, die auch unter anspruchsvollen Bedingungen standhält. Egal, ob Sie Leder, Pappe, Holz, Kork, Schaum, Kunststoff, Gummi oder Metall verbinden möchten, der DIP-Tools Alleskleber bewältigt jede Herausforderung.
Vielseitig einsetzbar
Durch seine breite Anwendungspalette eignet sich der Hochleistungskleber perfekt für Reparaturen im Haushalt, Handwerk, DIY-Projekte und vieles mehr. Er ist der Alleskönner für alle Klebebedürfnisse.
Lange Haltbarkeit
Der DIP-Tools Kleber sorgt nicht nur für schnelle Reparaturen, sondern auch für eine lang anhaltende Verbindung. Genießen Sie die Sicherheit, dass Ihre Projekte dauerhaft und zuverlässig zusammengehalten werden.
Wasserbeständigkeit
Der extra starke Kleber trotzt Feuchtigkeit und Wasser, was ihn auch ideal für Anwendungen in feuchten Umgebungen macht. Egal, ob Sie Outdoor-Möbel reparieren, Aquarien gestalten oder wasserfeste Bastelprojekte durchführen, dieser Kleber hält den Herausforderungen des Wassers stand.
Für saugende Untergründe
Dieser spezielle Kleber eignet sich auch besonders gut für saugende Untergründe. Egal ob Sie eine gebrochene Plastikkomponente reparieren oder andere weiche Teile miteinander verbinden möchten, der DIP-Tools Superkleber ist die richtige Wahl.
Verabschieden Sie sich von unsicheren Verbindungen und erleben Sie die Stärke des DIP-Tools Powerklebers. Mit seiner herausragenden Leistung und Vielseitigkeit ist er der perfekte Begleiter für alle, die Wert auf Qualität und Zuverlässigkeit legen.
The product protects against the harmful effects of petrol, oil products, corrosion, water, salt, and is weather and UV resistant. Forms a strong, resilient coating that resists moderate impact. Sound absorbing and soundproofing. Manufactured on the basis of synthetic resins, does not contain asphalt or bitumen. This remedy can be covered with all kinds of varnishes.
The product is characterized by very good adhesion to different substrates:
• Polyester laminates
• Polyester fillers
• Epoxy primers
• 2K acrylic primers
• Steel, stainless steel and galvanized steel base
• Aluminum base
• reactive substrate
• Plastics
areas of application
• As a lubricant and for lubricating all moving parts on machines, especially for material pairings such as plastic/plastic, plastic/metal or metal/metal such as garden tools, rubber on car doors and freezers, sunroofs, rails of all kinds, hinges, lock cylinders, garage doors . To protect electrical contacts from moisture and corrosion in plug connections in the electrical sector.
• For sealing and impregnating textiles, tarpaulins, tents and imitation leather.
• As a mold release agent in the plastics processing industry and as surface protection and care.
application
The optimum ambient temperature for use is between 15°C and 25°C. The surface must be clean, dry and free of grease. Before use, shake the container thoroughly for about 2 minutes. Make a test spray before use. The distance between the spray can and the surface to be painted should be 25 to 30 cm.
Apply the varnish in 2-3 thin coats. The time interval between individual shifts must not be longer than 5 or 10 minutes. Before applying another coat, shake the spray can well again. Clean the spray nozzle after use! – Hold the spray can upside down and spray until empty. For direct application to steel, it is recommended to apply a coat of varnish or enamel. Drying time at 20° C:
- dust dry: after approx. 30 minutes
- dry to the touch: after approx. 60 minutes
- fully dried: after approx. 2 hours
DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).
Instructions for optimal use of the universal seal
The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.
No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.
DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).
After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).
The waterproof adhesive, sealing and repair tape from DIP-Tools is the revolution in the field of adhesive tapes. Thanks to innovative technology, the adhesive tape is the perfect choice for all bonding and sealing work involving water and moisture. It can even be used in salt water. Aquatape is particularly suitable for repairing pools and gutters, but can also be used as a universal adhesive tape in almost all areas thanks to its enormous adhesive strength. The waterproof repair and sealing tape from DIP-Tools masters surfaces such as wood, plastic, rubber, concrete, metal or glass without any problems. The self-adhesive repair tape also clings effortlessly to uneven areas. The tape seals immediately and is a simple, fast and above all long-lasting alternative to expensive repair work. In addition, the sun and other environmental influences cannot harm your repair due to UV and weather-resistant properties.
Note: The revolutionary DIP-Tools repair tape can be used in the following areas: plumbing, roofs, rainwater gutters, pipes, cars, bicycles, motorcycles, boats, backpacks, water sports (floating suits, surfboards...), swimming pools, truck tarpaulins, umbrellas, etc
Technical characteristics of waterproof repair tape
- Color: Black
- Length: 150cm, width 10cm
- Tensile strength 2.4 N/mm²
- Temperature range -15°C - 100°C
- chemical resistant
- Suitable for EPDM
- self-adhesive
- UV-resistant
Instructions for the optimal use of the waterproof repair tape
- Surface must be free of dirt/dust and oil
- The leakage should be covered by 5 cm on all sides (corresponds to a foil dimension of 11 cm for a hole with a diameter of 1 cm)
- Cut the tape and stick it to the surface to be repaired or sealed, avoiding touching the adhesive surface if possible
Storage instructions for the waterproof repair tape
- Store in a dark and dry place at 15°C - 24°C room temperature
- Shelf life min. 2 years (if stored correctly)
9,99€
Unit price 2,00€ per 100ml9,99€
Unit price 2,00€ per 100mlDer DIP-Tools Schleimkleber 500ml ist der perfekte Begleiter für alle Schleim-Fans und Bastelbegeisterte. Mit seiner speziellen Formel auf Wasserbasis bietet dieser flüssige Kleber alles, was Sie für das Erstellen des besten Schleims benötigen. Ob für Schleim-Spaß zu Hause oder als Bastelkleber für Kunst- und Schulprojekte, unser Kleber ist ein wahrer Allrounder! Die praktische 500 ml Flasche reicht für endlose Basteleien und viele spannende Schleim-Abenteuer.
Der ultimative Schleimkleber für kreativen Spaß
Unser DIP-Tools Kinderkleber zeichnet sich durch seine hervorragende Qualität und Vielseitigkeit aus. Der durchsichtige, flüssige Kleber ist besonders beliebt bei Kindern ab 3 Jahren und bietet eine ideale Grundlage, um Schleim zu Hause zu kreieren. Dieser PVA Glue (Polyvinylalkohol) ist auf Wasserbasis, lösungsmittelfrei und damit besonders sicher in der Anwendung. Zudem ist der Kinderkleber geruchslos und leicht auswaschbar.
Rückstandslos abwaschbar
Dank seiner mittleren Viskosität und der transparenten, flüssigen Konsistenz lässt sich der Bastelkleber gleichmäßig und präzise auf verschiedenen Oberflächen auftragen. Der DIP-Tools Schleimkleber ist ideal für Projekte auf Papier, Holz und anderen Materialien, die einen starken, flexiblen Halt benötigen. Und das Beste: Der Slime ist rückstandslos mit Wasser abwaschbar, sodass er auch von Händen, Oberflächen und sogar Kleidung problemlos entfernt werden kann.
Sicher für Kinder und natürlich
Mit einem pH-Wert von 7 ist der DIP-Tools Schleimkleber sanft zu Haut und Materialien. Unser Kleber enthält natürliche Inhaltsstoffe und ist zu 90 % aus natürlichen Rohstoffen hergestellt. Darüber hinaus ist der Kleber mit Bitterstoffen versetzt, um ein Verschlucken zu verhindern, ideal für die Sicherheit von kleinen Bastlern.
Our all-round adhesive and sealing solution is suitable for almost all materials and weather conditions. The one-component, completely waterproof and extra strong universal assembly adhesive glues and seals almost all materials indoors and outdoors. Due to its enormous initial adhesion and final strength, the MS polymer assembly adhesive is ideal for fixing and sealing large material panels, fastening curtain rods and many other areas of application. The universal assembly adhesive is also a perfect alternative to drilling in almost every situation. But the universal assembly adhesive also shines in terms of longevity thanks to its UV and weather resistance. Yellowed and porous areas are a thing of the past. If the glued parts are to be removed at some point, our product can be painted over or removed mechanically.
Note: The universal assembly adhesive is suitable for materials such as wood, glass, metal, ceramics, concrete, natural stone, iron, aluminium, steel and plastics such as PVC. Please use our primer for gluing and sealing difficult-to-glue materials such as PE, PP and PTFE.
Technical properties of the universal assembly adhesive
- Color white
- Skin formation time: 8-10 minutes
- Curing time: 24 hours
- Final strength: 4 hours
- Shore hardness A: 65
- Tensile strength: 157 N/cm²
- Shear force: 196 N/cm²
- Flash point: 93°C
- Elongation at break 286%
- Curing speed: 4.5 mm/24h
- Density: 1.44 g/cm³
- Manufactured on the basis of silane-modified polymers
- moisture curing
- Solvent and shrinkage free
Storage instructions for the universal assembly adhesive
- Apply using a suitable cartridge press
- Minimum application temperature: 5 °C
- Store unopened in a cool, dry place
- Storage temperature between 10°C and 25°C
- Note the best-before date
Instructions for optimal use of the universal assembly adhesive
- The wings must be clean and free of grease and dust. Processing temperature +5°C to +40°C. Adhesion tests are recommended.
- Cut off the cartridge tip at the top of the cartridge and screw the nozzle.
- Cut the nozzle to get the desired angle, bead size and shape.
- Insert the cartridge into the cartridge gun and pull the trigger.
- Apply continuous beads or dots, applying enough pressure to properly apply the mounting adhesive.
Adhesive residue remover and universal cleaner - new - 500ml
Adhesive residue remover and universal cleaner - new - 500ml
High-performance cleaner for industry, home and trade
Very strong cleaning and loosening even with stubborn dirt. Gel formulation allows long exposure even on vertical surfaces. Very good material compatibility as it is acetone-free. Unpainted surfaces are not attacked. Low evaporation rate.
area of application
For removing residues of adhesive tape, labels and marking paint. For cleaning machine and plastic parts as well as metallic surfaces. For pre-cleaning
in the case of adhesions. To remove protective preservatives, e.g
on brake discs. For cleaning, de-oiling and degreasing.
application
Test for compatibility with plastic and paint in a preliminary test. Spray cleaner on the parts to be cleaned. Leave on for a short time and wipe off.
Material-friendly
Sensitive surfaces such as aluminium, brass and stainless steel are not attacked.
User friendly
No odor nuisance. Fast and effective cleaning. Acetone, silicone and AOX free.
a notice
Before treating, check plastic parts for compatibility in a non-visible area. Paint can be attacked. Our metal and plastic scraper will help you with burned-in or similarly serious dirt/sticking.
Universal - 2K epoxy resin adhesive BPA-free - new - transparent - 25ml
Universal - 2K epoxy resin adhesive BPA-free - new - transparent - 25ml
Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.
Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.
Technical properties of the universal 2-component adhesive
- Base: epoxy resin
- Color: transparent, colorless
- Handling strength 5-10 minutes
- Curing time 24 hours
- Viscosity 12,000 - 15,000 mPas
- Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
- Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
- Very good electrical insulation
- Available BPA free
Instructions for the optimal use of the universal 2-component adhesive
- The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
- Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
- Apply the mixture to both surfaces and press together
- The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
- Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests
Storage instructions for the universal 2-component adhesive
- Store away from acids
- Keep away from oxidizing agents
- Keep container in a well-ventilated area
Our all-round adhesive and sealing solution is suitable for almost all materials and weather conditions. The one-component, completely waterproof and extra strong universal assembly adhesive glues and seals almost all materials indoors and outdoors. Due to its enormous initial adhesion and final strength, the MS polymer assembly adhesive is ideal for fixing and sealing large material panels, fastening curtain rods and many other areas of application. The universal assembly adhesive is also a perfect alternative to drilling in almost every situation. But the universal assembly adhesive also shines in terms of longevity thanks to its UV and weather resistance. Yellowed and porous areas are a thing of the past. If the glued parts are to be removed at some point, our product can be painted over or removed mechanically.
Note: The universal assembly adhesive is suitable for materials such as wood, glass, metal, ceramics, concrete, natural stone, iron, aluminium, steel and plastics such as PVC. Please use our primer for gluing and sealing difficult-to-glue materials such as PE, PP and PTFE.
Technical properties of the universal assembly adhesive
- Color white
- Skin formation time: 8-10 minutes
- Curing time: 24 hours
- Final strength: 4 hours
- Shore hardness A: 65
- Tensile strength: 157 N/cm²
- Shear force: 196 N/cm²
- Flash point: 93°C
- Elongation at break 286%
- Curing speed: 4.5 mm/24h
- Density: 1.44 g/cm³
- Manufactured on the basis of silane-modified polymers
- moisture curing
- Solvent and shrinkage free
Storage instructions for the universal assembly adhesive
- Apply using a suitable cartridge press
- Minimum application temperature: 5 °C
- Store unopened in a cool, dry place
- Storage temperature between 10°C and 25°C
- Note the best-before date
Instructions for optimal use of the universal assembly adhesive
- The wings must be clean and free of grease and dust. Processing temperature +5°C to +40°C. Adhesion tests are recommended.
- Cut off the cartridge tip at the top of the cartridge and screw the nozzle.
- Cut the nozzle to get the desired angle, bead size and shape.
- Insert the cartridge into the cartridge gun and pull the trigger.
- Apply continuous beads or dots, applying enough pressure to properly apply the mounting adhesive.
