2-component adhesive

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area

Where adhesives fail, a universal primer usually helps. The durable universal primer from DIP-Tools is a primer for the pre-treatment of difficult-to-bond plastics such as PE, PP and silicone. It doesn't matter whether you want to prime indoors or outdoors. The product defies very high and low temperatures and withstands a wide variety of weather conditions. In addition, the high-quality, resealable bottle ensures that the primer does not dry out and can be used for a long time if stored optimally.

Tip: In order to achieve optimal results and maximum adhesive performance, we recommend that you only use the product in combination with other DIP-Tools adhesives.

Technical characteristics of the universal primer

• Temperature resistant
• weather resistant
• Suitable for materials that are difficult to bond

Instructions for optimal use of the universal primer

1. Remove moisture, grease, oil, dust and other contaminants from the surface
2. Coat both sides with universal primer using a brush or cloth
3. Leave to dry for 1-2 minutes
4. Finish with the glue of your choice from the DIP-Tools range

Storage instructions for the universal primer:

• Close the bottle properly immediately after use.
• Store cool and dry
• Protect from frost, intense heat, sunlight, humidity and water.

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area