all products

The universal aluminum door sill from DIP-Tools is a durable quality product due to the low-odour, pollutant-free and rust-free material. It not only saves energy, but also money, because it offers ideal protection against heat and energy loss. As a door seal for room and/or front doors, it not only stops drafts, but also offers reliable protection against annoying dust, insects, rain, moisture, odors, noise and much more. The rust-free universal aluminum door sill is also a true all-rounder and, with the highly elastic silicone hose seal, fits on the one hand for every door. On the other hand, the product can also be used as a weather-resistant threshold or weatherboard to allow rain to drain off external doors and to protect sensitive materials such as wood. Last but not least, the self-adhesive universal aluminum door sill scores points with its incredibly easy installation. Simply adjust the door sill to the desired size and glue or screw it tight. With the DIP-Tools assembly adhesive it also works on difficult surfaces.

Technical characteristics of the universal alu threshold

• Type: ARB
• Area of application: interior and exterior doors
• Material: aluminum
• Gasket: silicone
• Dimension: 45*45mm
• silver

Instructions for the optimal installation of the door sill

1. Shorten the door sill to the desired length
2. If you want to glue the door sill, the surface must be freed from dirt, dust, oil and grease. If you want to screw the product, you can skip this step
3. Glue or screw the door sill

Tip: If you want to glue the door sill to difficult surfaces, we recommend using DIP-Tools universal assembly adhesive .

We would be happy to make you an offer for other lengths. Please contact us.

Where adhesives fail, a universal primer usually helps. The durable universal primer from DIP-Tools is a primer for the pre-treatment of difficult-to-bond plastics such as PE, PP and silicone. It doesn't matter whether you want to prime indoors or outdoors. The product defies very high and low temperatures and withstands a wide variety of weather conditions. In addition, the high-quality, resealable bottle ensures that the primer does not dry out and can be used for a long time if stored optimally.

Tip: In order to achieve optimal results and maximum adhesive performance, we recommend that you only use the product in combination with other DIP-Tools adhesives.

Technical characteristics of the universal primer

• Temperature resistant
• weather resistant
• Suitable for materials that are difficult to bond

Instructions for optimal use of the universal primer

1. Remove moisture, grease, oil, dust and other contaminants from the surface
2. Coat both sides with universal primer using a brush or cloth
3. Leave to dry for 1-2 minutes
4. Finish with the glue of your choice from the DIP-Tools range

Storage instructions for the universal primer:

• Close the bottle properly immediately after use.
• Store cool and dry
• Protect from frost, intense heat, sunlight, humidity and water.

The Alumat flat threshold is used to bridge different floor coverings at the same height. It consists of aluminum and is coated with a colored powder in a special baking process.

The high-quality self-adhesive strip enables secure attachment without screws or dowels.

Technical characteristics of the flat sleeper

• Material: aluminum
• Dimensions (lxwxh): 1000mm x 40mm x 3mm
• Color silver anodized

Instructions for optimal installation of the flat sleeper

1. Cut the aluminum rail to the frame clearance.

2. Apply assembly adhesive to the inside of the horizontal and vertical legs. Immediate adhesion and walkability is achieved if hot glue is additionally applied in dots.

The DIP-Tools UV adhesive is a solvent-free, one-component adhesive that is characterized by a short curing time and easy application. Curing takes place by irradiation with UV or visible light. It is suitable for plastics, wood, metal, ceramics and glass, among other things.

Technical characteristics of the UV glue

• Base: acrylic resin
  
• Viscosity: medium viscosity
• Color: colorless
• Density: 1.04 g/cm³
• Shore hardness A: 75
  
• Temperature resistance: -40-120°C
  
• Flash point: 65°C
• Hand strength: > 10s

Instructions for using the glue

1. At room temperature, simply open the tube and apply the adhesive evenly. The adhesive clings to the surface. It is recommended to have a cloth ready for wiping.
   
2. Apply glue and join and press the parts to be connected. Then sufficiently irradiate with the UV lamp. The hand strength is reached after at least 10s, for larger surfaces the irradiation is to be increased by an appropriate time.
3. Wipe the nozzle after use so that the lid does not stick and then close the tube tightly. After curing, you can sand or file the splice. Because the adhesive can be applied in several layers, it is well suited for processing in two steps: first fix the objects to be glued with a minimal amount and then apply enough material to create a sufficiently stable connection. It is well suited for punctiform connections, not for flat gluing. The contents are sufficient for around 400 applications with punctiform connections.

Our all-round adhesive and sealing solution is suitable for almost all materials and weather conditions. The one-component, completely waterproof and extra strong universal assembly adhesive glues and seals almost all materials indoors and outdoors. Due to its enormous initial adhesion and final strength, the MS polymer assembly adhesive is ideal for fixing and sealing large material panels, fastening curtain rods and many other areas of application. The universal assembly adhesive is also a perfect alternative to drilling in almost every situation. But the universal assembly adhesive also shines in terms of longevity thanks to its UV and weather resistance. Yellowed and porous areas are a thing of the past. If the glued parts are to be removed at some point, our product can be painted over or removed mechanically.

Note: The universal assembly adhesive is suitable for materials such as wood, glass, metal, ceramics, concrete, natural stone, iron, aluminium, steel and plastics such as PVC. Please use our primer for gluing and sealing difficult-to-glue materials such as PE, PP and PTFE.

Technical properties of the universal assembly adhesive

• Color white
• Skin formation time: 8-10 minutes
• Curing time: 24 hours
• Final strength: 4 hours
• Shore hardness A: 65
• Tensile strength: 157 N/cm²
• Shear force: 196 N/cm²
• Flash point: 93°C
• Elongation at break 286%
• Curing speed: 4.5 mm/24h
• Density: 1.44 g/cm³
• Manufactured on the basis of silane-modified polymers
• moisture curing
• Solvent and shrinkage free

Storage instructions for the universal assembly adhesive

• Apply using a suitable cartridge press
• Minimum application temperature: 5 °C
• Store unopened in a cool, dry place
• Storage temperature between 10°C and 25°C
• Note the best-before date

Instructions for optimal use of the universal assembly adhesive

1. The wings must be clean and free of grease and dust. Processing temperature +5°C to +40°C. Adhesion tests are recommended.
2. Cut off the cartridge tip at the top of the cartridge and screw the nozzle.
3. Cut the nozzle to get the desired angle, bead size and shape.
4. Insert the cartridge into the cartridge gun and pull the trigger.
5. Apply continuous beads or dots, applying enough pressure to properly apply the mounting adhesive.

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).

The DIP-Tools cockpit spray is a fully synthetic surface care product with a highly lubricating microfilm. The high-temperature-resistant, silicone-free care spray has an antistatic effect. It is used to support the assembly of plastic parts and stiff seat belts. It is also used to care for and protect plastic and wooden fittings. It eliminates squeaking, cracking and creaking noises in the vehicle interior and prevents door seals from freezing.
It is also UV protective on plastic and rubber. The gliding particles create smooth surfaces and also make seat belts run smoothly again. It has a satin finish with no greasy, sticky or shiny residue.

area of application

• Maintenance of plastic parts in the cockpit
• Seat belt maintenance
• For noises, especially in the vehicle interior (squeaking, cracking and creaking noises)
• Stiff window guides

application

DIP-Tools Industrial Cockpit Spray is safe to use on most surfaces. Nevertheless, we recommend that you carry out your own tests before use.
Spray directly onto the surface to be cleaned from a distance of approx. 30 cm and wipe off with a clean, dry cloth.

Characteristics

• Reduces friction thanks to grease-free, satin-matt anti-slip protection
• Effectively cleans and delays renewed absorption of dirt and dust
• Prevents the graying and discoloration of plastics through UV protection
• Regenerates stressed plastics
• Compatible with all common plastic materials
• Leaves no stains on textiles (pay attention to the spray distance!)

The Alumat plastic cover strip ARD is used for three-sided, all-round sealing of doors in old and new buildings.
It is attached to the door frame using durable double-sided adhesive tape.

Technical characteristics of the door seal

• Type: ARD
• Material: PVC, silicone
• Dimensions (lxwxh): PVC strip: 5x 1050mm x 28mm x 8mm, silicone seal: 1 x 5250m
• color white
• Gasket silicone

Instructions for optimal installation of the door seal

1. Cut approx. 2 cm long pieces from the leftover sections.

2. Close the door and clamp (do not glue yet) the vertical cover strips so that the silicone seal acts on the closed door with slight pressure.

3. Glue the approx. 2 cm long cover strip sections to the frame. (Normally 3-4 pieces are sufficient on each side of the frame.)

4. Then open the door and remove the cover strips. Remove the protective film from the adhesive tape and stick the frame strips to the upright frame reveals along the installation template.

5. Remove the capping sections (installation templates).

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).

The universal aluminum door sill from DIP-Tools is a durable quality product due to the low-odour, pollutant-free and rust-free material. It not only saves energy, but also money, because it offers ideal protection against heat and energy loss. As a door seal for room and/or front doors, it not only stops drafts, but also offers reliable protection against annoying dust, insects, rain, moisture, odors, noise and much more. The rust-free universal aluminum door sill is also a true all-rounder and, with the highly elastic silicone hose seal, fits on the one hand for every door. On the other hand, the product can also be used as a weather-resistant threshold or weatherboard to allow rain to drain off external doors and to protect sensitive materials such as wood. Last but not least, the self-adhesive universal aluminum door sill scores points with its incredibly easy installation. Simply adjust the door sill to the desired size and glue or screw it tight. With the DIP-Tools assembly adhesive it also works on difficult surfaces.

Technical characteristics of the universal alu threshold

• Type: BM 30
• Area of application: interior and exterior doors
• Material: aluminum
• Gasket: silicone
• Dimension: 55 x 8mm
• silver

Instructions for the optimal installation of the door sill

1. Shorten the door sill to the desired length
2. If you want to glue the door sill, the surface must be freed from dirt, dust, oil and grease. If you want to screw the product, you can skip this step
3. Glue or screw the door sill

Tip: If you want to glue the door sill to difficult surfaces, we recommend using DIP-Tools universal assembly adhesive .

We would be happy to make you an offer for other lengths. Please contact us.

• VERY LOW ODOR - You don't want to air it out for a long time and have strong smells after using sanitary silicone? Our bathroom silicone has very little odor thanks to its neutral cross-linking system.
• EASY APPLICATION - The kitchen silicone is particularly easy to work with thanks to its high-quality composition. This makes the silicone suitable for sealing and for silicone joints.
• OPTIMAL ADHESION - The high-quality, permanently elastic silicone sealant withstands the highest demands. The sanitary putty is resistant to aging, weathering and a variety of chemicals.
• FUNGICIDE EQUIPPED - This means that the silicone is able to protect surfaces from fungal attack, which makes the bathroom silicone ideal for sanitary and wet areas such as kitchens, bathrooms and outdoor areas.
• VERSATILE - The silicone works optimally in many areas. Whether for sealing joints, sanitary facilities, glass bonding and showcase construction or for sealing profile glass.

The waterproof adhesive, sealing and repair tape from DIP-Tools is the revolution in the field of adhesive tapes. Thanks to innovative technology, the adhesive tape is the perfect choice for all bonding and sealing work involving water and moisture. It can even be used in salt water. Aquatape is particularly suitable for repairing pools and gutters, but can also be used as a universal adhesive tape in almost all areas thanks to its enormous adhesive strength. The waterproof repair and sealing tape from DIP-Tools masters surfaces such as wood, plastic, rubber, concrete, metal or glass without any problems. The self-adhesive repair tape also clings effortlessly to uneven areas. The tape seals immediately and is a simple, fast and above all long-lasting alternative to expensive repair work. In addition, the sun and other environmental influences cannot harm your repair due to UV and weather-resistant properties.

Note: The revolutionary DIP-Tools repair tape can be used in the following areas: plumbing, roofs, rainwater gutters, pipes, cars, bicycles, motorcycles, boats, backpacks, water sports (floating suits, surfboards...), swimming pools, truck tarpaulins, umbrellas, etc

Technical characteristics of waterproof repair tape

• Color: Black
• Length: 150cm, width 10cm
• Tensile strength 2.4 N/mm²
• Temperature range -15°C - 100°C
• chemical resistant
• Suitable for EPDM
• self-adhesive
• UV-resistant

Instructions for the optimal use of the waterproof repair tape

1. Surface must be free of dirt/dust and oil
2. The leakage should be covered by 5 cm on all sides (corresponds to a foil dimension of 11 cm for a hole with a diameter of 1 cm)
3. Cut the tape and stick it to the surface to be repaired or sealed, avoiding touching the adhesive surface if possible

Storage instructions for the waterproof repair tape

4. Store in a dark and dry place at 15°C - 24°C room temperature
5. Shelf life min. 2 years (if stored correctly)

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).