sealing

Knetfix 2-component high-performance adhesive dough from DIP-Tools is a robust all-rounder with an incredibly versatile area of application. The product can be used on a wide variety of surfaces such as ceramics, glass, wood, metal or concrete for gluing, filling, modeling or sealing. In addition, thanks to its UV and weather-resistant properties, the product can be processed indoors and outdoors and even under water. Even heavier loads such as chemicals, oil or petrol as well as extreme cold (-30°C) and heat (+120°C) cannot harm the modeling clay. But our adhesive putty is not only convincing in terms of versatility and longevity. The fast processing and curing time in particular speaks for the 2-component high-performance adhesive putty. The putty can be processed in a full 10 minutes and after just 30 minutes the mass can be further processed by drilling, sawing, sanding, sanding or painting.

Technical properties of the high-performance adhesive putty

• Base: epoxy and polyamine resins
• Processing time: approx. 10 minutes
• Curing time: 12 hours
• Bond Strength: 22Mpa
• Viscosity: 12,000 MPa xs
• Can be painted over and varnished
• Doesn't shrink
• Resistant to water, oil, petrol, UV, heat, cold and many chemicals

Instructions for the optimal use of the high-performance adhesive dough

1. Remove dirt, dust and grease/oil from the surface
2. Mix Knetfix until a uniform mass is formed. Please wear gloves.
3. Carefully press the compound onto the area to be repaired, the total processing time is 10 minutes
4. If necessary, use a screw clamp or similar to press on for 15 minutes
5. After half an hour, the mass can be further processed (e.g. drilling, grinding, painting, etc.)
6. Final strength is reached after 12 hours

Storage instructions for the high-performance adhesive dough

• Keep away from acids
• Keep away from oxidizing agents
• Store in well-ventilated areas

The waterproof adhesive, sealing and repair tape from DIP-Tools is the revolution in the field of adhesive tapes. Thanks to innovative technology, the adhesive tape is the perfect choice for all bonding and sealing work involving water and moisture. It can even be used in salt water. Aquatape is particularly suitable for repairing pools and rain gutters, but thanks to its enormous adhesive strength it can also be used as a universal adhesive tape in almost all areas. The waterproof repair and sealing tape from DIP-Tools masters surfaces such as wood, plastic, rubber, concrete, metal or glass without any problems. The self-adhesive repair tape even clings effortlessly to uneven areas. The tape seals immediately and is a simple, fast and above all long-lasting alternative to expensive repair work. In addition, the sun and other environmental influences cannot harm your repair due to its UV and weather-resistant properties.

Note: The revolutionary DIP-Tools repair tape can be used in the following areas: plumbing, roofs, rainwater gutters, pipes, cars, bicycles, motorcycles, boats, backpacks, water sports (floating suits, surfboards...), swimming pools, truck tarpaulins, umbrellas, etc

Technical characteristics of waterproof repair tape

• Color: transparent, colorless
• Length: 150cm, width 10cm
• Tensile strength 2.4 N/mm²
• Temperature range -15°C - 100°C
• chemical resistant
• Suitable for EPDM
• self-adhesive
• UV-resistant

Instructions for the optimal use of the waterproof repair tape

1. Surface must be free of dirt, dust and oil
2. The leakage should be covered by 5 cm on all sides (corresponds to a foil dimension of 11 cm for a hole with a diameter of 1 cm)
3. Cut the tape and stick it to the surface to be repaired or sealed, avoiding touching the adhesive surface if possible

Storage instructions for the waterproof repair tape

• Store in a dark and dry place at 15°C - 24°C room temperature
• Shelf life min. 2 years (if stored correctly)

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).

The product protects against the harmful effects of petrol, oil products, corrosion, water, salt, and is weather and UV resistant. Forms a strong, resilient coating that resists moderate impact. Sound absorbing and soundproofing. Manufactured on the basis of synthetic resins, does not contain asphalt or bitumen. This remedy can be covered with all kinds of varnishes.
The product is characterized by very good adhesion to different substrates:
• Polyester laminates
• Polyester fillers
• Epoxy primers
• 2K acrylic primers
• Steel, stainless steel and galvanized steel base
• Aluminum base
• reactive substrate
• Plastics

areas of application

• As a lubricant and for lubricating all moving parts on machines, especially for material pairings such as plastic/plastic, plastic/metal or metal/metal such as garden tools, rubber on car doors and freezers, sunroofs, rails of all kinds, hinges, lock cylinders, garage doors . To protect electrical contacts from moisture and corrosion in plug connections in the electrical sector.
• For sealing and impregnating textiles, tarpaulins, tents and imitation leather.
• As a mold release agent in the plastics processing industry and as surface protection and care.

application

The optimum ambient temperature for use is between 15°C and 25°C. The surface must be clean, dry and free of grease. Before use, shake the container thoroughly for about 2 minutes. Make a test spray before use. The distance between the spray can and the surface to be painted should be 25 to 30 cm.
Apply the varnish in 2-3 thin coats. The time interval between individual shifts must not be longer than 5 or 10 minutes. Before applying another coat, shake the spray can well again. Clean the spray nozzle after use! – Hold the spray can upside down and spray until empty. For direct application to steel, it is recommended to apply a coat of varnish or enamel. Drying time at 20° C:
- dust dry: after approx. 30 minutes
- dry to the touch: after approx. 60 minutes
- fully dried: after approx. 2 hours

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).

The waterproof adhesive, sealing and repair tape from DIP-Tools is the revolution in the field of adhesive tapes. Thanks to innovative technology, the adhesive tape is the perfect choice for all bonding and sealing work involving water and moisture. It can even be used in salt water. Aquatape is particularly suitable for repairing pools and gutters, but can also be used as a universal adhesive tape in almost all areas thanks to its enormous adhesive strength. The waterproof repair and sealing tape from DIP-Tools masters surfaces such as wood, plastic, rubber, concrete, metal or glass without any problems. The self-adhesive repair tape also clings effortlessly to uneven areas. The tape seals immediately and is a simple, fast and above all long-lasting alternative to expensive repair work. In addition, the sun and other environmental influences cannot harm your repair due to UV and weather-resistant properties.

Note: The revolutionary DIP-Tools repair tape can be used in the following areas: plumbing, roofs, rainwater gutters, pipes, cars, bicycles, motorcycles, boats, backpacks, water sports (floating suits, surfboards...), swimming pools, truck tarpaulins, umbrellas, etc

Technical characteristics of waterproof repair tape

• Color: Black
• Length: 150cm, width 10cm
• Tensile strength 2.4 N/mm²
• Temperature range -15°C - 100°C
• chemical resistant
• Suitable for EPDM
• self-adhesive
• UV-resistant

Instructions for the optimal use of the waterproof repair tape

1. Surface must be free of dirt/dust and oil
2. The leakage should be covered by 5 cm on all sides (corresponds to a foil dimension of 11 cm for a hole with a diameter of 1 cm)
3. Cut the tape and stick it to the surface to be repaired or sealed, avoiding touching the adhesive surface if possible

Storage instructions for the waterproof repair tape

4. Store in a dark and dry place at 15°C - 24°C room temperature
5. Shelf life min. 2 years (if stored correctly)

DIP-Tools Premium universal seal is suitable for a wide variety of areas, e.g. B. roof, wall, wet cells suitable. In the automotive sector as a supplement to underbody protection and as a brushable seam seal. The creation of watertightness for skylights, skylights, eaves, pipe junctions, wall connections, chimney connections outside, outside ventilation etc. The sealing of balconies and terraces under tiles and
Coverings and against moisture in cracks and fractures in masonry is possible without any problems. It is suitable for substrates such as B. Styrofoam, plastics, concrete, wood, stone, metal, sanded roofing felt. It achieves crack bridging of at least 10 mm, is UV resistant and not sensitive to spray and rain water (even during curing).

Instructions for optimal use of the universal seal

The surfaces must be solid, load-bearing and free from contaminants (dust, oil, dirt, etc.). Thoroughly remove any residue from previous coatings. DIP-Tools Premium universal seal has excellent adhesion to many building materials such as concrete, glass, screed, ceramics, tiles, wood and various metals such as aluminium, steel, zinc and copper.

No discoloration in the metals, even unpainted. Bitumen can cause discoloration. Please always carry out preliminary tests! DIP-Tools Premium universal sealing can also be used without a primer on damp surfaces, but not in standing water.

DIP-Tools Premium universal sealing can be used directly from the container, only prior stirring is required. It can be applied with a roller or brush/broad brush in a thickness of 2 layers of 1 mm each. After drying, a layer thickness of approx. 2 mm should have been achieved. Apply the second layer only after the first layer has completely dried (approx. 3 hours at 23°C and 50% relative humidity).

After 12 hours (at 23°C and 50% relative humidity) the treated area is completely dry and subsequent activities can be started. Temperature fluctuations and/or changes in humidity can lead to delayed curing. Consumption approx. 1.4 - 2.0 kg/m². Connection and expansion joints must be prepared accordingly in order to achieve optimal results. Professional backing material is essential here (e.g. polyethylene foamed into strands). For optimal elasticity of the sealant over the joints, assume a 2:1 or max. 1:1 width/depth ratio of the joint (minimum joint width 6 mm, maximum 20 mm).