Aktionen

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area

Knetfix 2-component high-performance adhesive dough from DIP-Tools is a robust all-rounder with an incredibly versatile area of application. The product can be used on a wide variety of surfaces such as ceramics, glass, wood, metal or concrete for gluing, filling, modeling or sealing. In addition, thanks to its UV and weather-resistant properties, the product can be processed indoors and outdoors and even under water. Even heavier loads such as chemicals, oil or petrol as well as extreme cold (-30°C) and heat (+120°C) cannot harm the modeling clay. But our adhesive putty is not only convincing in terms of versatility and longevity. The fast processing and curing time in particular speaks for the 2-component high-performance adhesive putty. The putty can be processed in a full 10 minutes and after just 30 minutes the mass can be further processed by drilling, sawing, sanding, sanding or painting.

Technical properties of the high-performance adhesive putty

• Base: epoxy and polyamine resins
• Processing time: approx. 10 minutes
• Curing time: 12 hours
• Bond Strength: 22Mpa
• Viscosity: 12,000 MPa xs
• Can be painted over and varnished
• Doesn't shrink
• Resistant to water, oil, petrol, UV, heat, cold and many chemicals

Instructions for the optimal use of the high-performance adhesive dough

1. Remove dirt, dust and grease/oil from the surface
2. Mix Knetfix until a uniform mass is formed. Please wear gloves.
3. Carefully press the compound onto the area to be repaired, the total processing time is 10 minutes
4. If necessary, use a screw clamp or similar to press on for 15 minutes
5. After half an hour, the mass can be further processed (e.g. drilling, grinding, painting, etc.)
6. Final strength is reached after 12 hours

Storage instructions for the high-performance adhesive dough

• Keep away from acids
• Keep away from oxidizing agents
• Store in well-ventilated areas

The waterproof adhesive, sealing and repair tape from DIP-Tools is the revolution in the field of adhesive tapes. Thanks to innovative technology, the adhesive tape is the perfect choice for all bonding and sealing work involving water and moisture. It can even be used in salt water. Aquatape is particularly suitable for repairing pools and rain gutters, but thanks to its enormous adhesive strength it can also be used as a universal adhesive tape in almost all areas. The waterproof repair and sealing tape from DIP-Tools masters surfaces such as wood, plastic, rubber, concrete, metal or glass without any problems. The self-adhesive repair tape even clings effortlessly to uneven areas. The tape seals immediately and is a simple, fast and above all long-lasting alternative to expensive repair work. In addition, the sun and other environmental influences cannot harm your repair due to its UV and weather-resistant properties.

Note: The revolutionary DIP-Tools repair tape can be used in the following areas: plumbing, roofs, rainwater gutters, pipes, cars, bicycles, motorcycles, boats, backpacks, water sports (floating suits, surfboards...), swimming pools, truck tarpaulins, umbrellas, etc

Technical characteristics of waterproof repair tape

• Color: transparent, colorless
• Length: 150cm, width 10cm
• Tensile strength 2.4 N/mm²
• Temperature range -15°C - 100°C
• chemical resistant
• Suitable for EPDM
• self-adhesive
• UV-resistant

Instructions for the optimal use of the waterproof repair tape

1. Surface must be free of dirt, dust and oil
2. The leakage should be covered by 5 cm on all sides (corresponds to a foil dimension of 11 cm for a hole with a diameter of 1 cm)
3. Cut the tape and stick it to the surface to be repaired or sealed, avoiding touching the adhesive surface if possible

Storage instructions for the waterproof repair tape

• Store in a dark and dry place at 15°C - 24°C room temperature
• Shelf life min. 2 years (if stored correctly)

The DIP-Tools UV adhesive is a solvent-free, one-component adhesive that is characterized by a short curing time and easy application. Curing takes place by irradiation with UV or visible light. It is suitable for plastics, wood, metal, ceramics and glass, among other things.

Technical characteristics of the UV glue

• Base: acrylic resin
  
• Viscosity: medium viscosity
• Color: colorless
• Density: 1.04 g/cm³
• Shore hardness A: 75
  
• Temperature resistance: -40-120°C
  
• Flash point: 65°C
• Hand strength: > 10s

Instructions for using the glue

1. At room temperature, simply open the tube and apply the adhesive evenly. The adhesive clings to the surface. It is recommended to have a cloth ready for wiping.
   
2. Apply glue and join and press the parts to be connected. Then sufficiently irradiate with the UV lamp. The hand strength is reached after at least 10s, for larger surfaces the irradiation is to be increased by an appropriate time.
3. Wipe the nozzle after use so that the lid does not stick and then close the tube tightly. After curing, you can sand or file the splice. Because the adhesive can be applied in several layers, it is well suited for processing in two steps: first fix the objects to be glued with a minimal amount and then apply enough material to create a sufficiently stable connection. It is well suited for punctiform connections, not for flat gluing. The contents are sufficient for around 400 applications with punctiform connections.

The product protects against the harmful effects of petrol, oil products, corrosion, water, salt, and is weather and UV resistant. Forms a strong, resilient coating that resists moderate impact. Sound absorbing and soundproofing. Manufactured on the basis of synthetic resins, does not contain asphalt or bitumen. This remedy can be covered with all kinds of varnishes.
The product is characterized by very good adhesion to different substrates:
• Polyester laminates
• Polyester fillers
• Epoxy primers
• 2K acrylic primers
• Steel, stainless steel and galvanized steel base
• Aluminum base
• reactive substrate
• Plastics

areas of application

• As a lubricant and for lubricating all moving parts on machines, especially for material pairings such as plastic/plastic, plastic/metal or metal/metal such as garden tools, rubber on car doors and freezers, sunroofs, rails of all kinds, hinges, lock cylinders, garage doors . To protect electrical contacts from moisture and corrosion in plug connections in the electrical sector.
• For sealing and impregnating textiles, tarpaulins, tents and imitation leather.
• As a mold release agent in the plastics processing industry and as surface protection and care.

application

The optimum ambient temperature for use is between 15°C and 25°C. The surface must be clean, dry and free of grease. Before use, shake the container thoroughly for about 2 minutes. Make a test spray before use. The distance between the spray can and the surface to be painted should be 25 to 30 cm.
Apply the varnish in 2-3 thin coats. The time interval between individual shifts must not be longer than 5 or 10 minutes. Before applying another coat, shake the spray can well again. Clean the spray nozzle after use! – Hold the spray can upside down and spray until empty. For direct application to steel, it is recommended to apply a coat of varnish or enamel. Drying time at 20° C:
- dust dry: after approx. 30 minutes
- dry to the touch: after approx. 60 minutes
- fully dried: after approx. 2 hours

The odorless and colorless superglue from DIP-Tools offers maximum strength with an extremely wide range of applications and is therefore the first choice in the field of fast-hardening all-purpose glue. It can be used on a wide range of materials such as craft glue, rubber glue, ceramic glue and metal glue. You can even use the DIP-Tools superglue as wood glue. The odorless superglue takes effect just 10 seconds after application and hand strength is achieved for many materials. After a short hardening, the odorless superglue offers a very high final strength. The product is also suitable for sensitive gluing work, because its colorlessness means it can be processed without a trace and efflorescence and white haze are a thing of the past. When developing the DIP tool superglue, we paid particular attention to safety for the user. On the one hand, the product can be used anywhere thanks to its odorless, RoHs-compliant formulation. On the other hand, our ergonomic, soft bottle made in Germany ensures optimal application - without any sticky fingers.

Note: The odorless superglue is suitable for materials such as rubber, metal, wood, aluminium, ABS, polycarbonate and PVC. Please use our primer for plastics that are difficult to bond, such as PE and PP.

Technical properties of the odorless instant glue

• Base: methoxyethyl cyanoacrylate
• Color: transparent, colorless
• Viscosity: 25°C (Brookfield) approx. 120 - 170 mPa.s
• Density: 1.11 g/cm³
• Gap filling capacity: 0.15 mm
• Temperature resistance from: -40 to +80°C
• Handling strength: 5 - 90 seconds
• Final strength: 24 hours
• moisture curing
• 100% odorless
• Label-free, RoHs compliant

Fixing times of the odorless superglue

• ABS: 10-20 seconds
• Mild Steel: 5-10 seconds
• Polycarbonate: 20-35 seconds
• Aluminum: 5-10 seconds
• Pine wood: 5-10 seconds
• Beech wood: 15-25 seconds
• PVC: 10-20 seconds

Instructions for the optimal use of the odorless superglue

1. The parts to be bonded must be clean and free of oil and grease.
2. Apply DIP-Tools superglue thinly to one side
3. Join the parts to be connected and press together
4. The parts should be positioned as precisely as possible because of the sometimes short fixing time (adhesive is hand-tight after 5 - 90 seconds).
5. The optimum relative humidity should be around 65%

Storage instructions for the odorless superglue

• Store cool (5°C to 8°C), dark and dry
• Storage time: at least 12 months (if stored correctly)

Our transparent universal 2-component adhesive based on epoxy resin easily masters almost all areas of application and materials indoors and outdoors. The product shines with excellent adhesion and fast curing after mixing the two components. After just five minutes, there is strong hand strength, which is particularly useful when gluing surfaces. But our universal 2-component adhesive based on epoxy resin is also impressive in terms of final strength and durability and impresses with its maximum adhesive strength and adhesive strength with low porosity. Furthermore, the simple application and storage of the universal 2-component adhesive are convincing. By gently pressing the double-chamber tip, the 2 components slide evenly onto the material in the correct mixing ratio of 1:1 and with minimal creep behavior. You can even apply the glue under water if you use a primer first. In addition, the 2-component adhesive with two resealable closure chambers remains unmixed for a long time. Last but not least, the glue is also available free of harmful BPA. With the universal 2-component adhesive based on epoxy resin, there are no limits to your creativity, because it can be mixed with any colorant.

Note: The universal 2-component adhesive based on epoxy resin is suitable for materials such as glass, metal, wood, leather, ceramics, porcelain, jewelry and plastics such as PVC. Please use our primer for plastics such as PE and PP.

Technical properties of the universal 2-component adhesive

• Base: epoxy resin
• Color: transparent, colorless
• Handling strength 5-10 minutes
• Curing time 24 hours
• Viscosity 12,000 - 15,000 mPas
• Cure at 50°C Shear at 25°C: 1 hour 4 N/mm², 24 hours 7 N/mm², 72 hours 12 N/mm²
• Excellent resistance to moisture, water, oil, acids, alkalis, high temperatures and yellowing
• Very good electrical insulation
• Available BPA free

Instructions for the optimal use of the universal 2-component adhesive

1. The surface to be bonded must be roughened and clean, dry and free from oil, grease and wax
2. Place the two components on a disposable surface and mix thoroughly until a cloudy sticky consistency forms
3. Apply the mixture to both surfaces and press together
4. The hand strength is reached in 5 minutes, the full adhesive strength within 1 hour and the final strength after 24 hours (at 25 °C)
5. Due to the variety of uses of the product and the respective special circumstances (e.g. processing parameters, material properties, etc.), we recommend that the user first carry out their own tests

Storage instructions for the universal 2-component adhesive

• Store away from acids
• Keep away from oxidizing agents
• Keep container in a well-ventilated area

High-performance cleaner for industry, home and trade

Very strong cleaning and loosening even with stubborn dirt. Gel formulation allows long exposure even on vertical surfaces. Very good material compatibility as it is acetone-free. Unpainted surfaces are not attacked. Low evaporation rate.

area of application

For removing residues of adhesive tape, labels and marking paint. For cleaning machine and plastic parts as well as metallic surfaces. For pre-cleaning
in the case of adhesions. To remove protective preservatives, e.g
on brake discs. For cleaning, de-oiling and degreasing.

application

Test for compatibility with plastic and paint in a preliminary test. Spray cleaner on the parts to be cleaned. Leave on for a short time and wipe off.

Material-friendly

Sensitive surfaces such as aluminium, brass and stainless steel are not attacked.

User friendly

No odor nuisance. Fast and effective cleaning. Acetone, silicone and AOX free.

a notice

Before treating, check plastic parts for compatibility in a non-visible area. Paint can be attacked. Our metal and plastic scraper will help you with burned-in or similarly serious dirt/sticking.

The Alumat flat threshold is used to bridge different floor coverings at the same height. It consists of aluminum and is coated with a colored powder in a special baking process.

The high-quality self-adhesive strip enables secure attachment without screws or dowels.

Technical characteristics of the flat sleeper

• Material: aluminum
• Dimensions (lxwxh): 1000mm x 40mm x 3mm
• Color silver anodized

Instructions for optimal installation of the flat sleeper

1. Cut the aluminum rail to the frame clearance.

2. Apply assembly adhesive to the inside of the horizontal and vertical legs. Immediate adhesion and walkability is achieved if hot glue is additionally applied in dots.